Thin Fit

I received the item to my complete satisfaction

I love this brand so I was skeptical when I only saw 3 stars but I’m glad I tried it out. I read that others say it comes off too easily. You’ll have to be playing sports to experience this maybe but in my daily routine I didn’t experience it being lose at all. If you’re using it for regular daily activities you should have no problem. It’s a great fit and covers all around the sides except the dial as shown in the images online. I’ve attached a couple pics

Was worried over some of the reviews that said this slips off or doesn't fit well. It fits my S5 perfectly and snaps on securely and easily as well - no need to remove the strap to put it on. Looks nice and provides some protection without the bulk. I have a few of these from different makers, so bulkier that the straps go through and some similar with more of a pronounced screen bezel area - those aren't bad either. This one is the best one I have found for it's minimal appearance while also providing a bit of protection around the screen without covering it with film. Great for casual every day wear and pops off easily enough if you want to dress the watch up. Update: I was going to buy another one in a new color but after reading reviews and looking at photos of 2021 purchases, it looks like this product has changed: the logo is now centered whereas mine is off to the right as you can see in photos of 2019/2020 reviews. Additionally, I have used this often since I bought it and it doesn't fall off nor has it cracked. I'm concerned that not only has the logo been moved, but something else has changed that makes the newer version more fragile. I may try an updated version, but am worried a bit.

Pros - The case does a good job when it come to protecting the sides of the watch. It’s slim and look nice. Cons - The case does comes off easy. Haven’t lost it yet but I feel like it might soon. When the case came off, it bubbled the edges of my screen protector too. Ended up putting some double sided tape on the very edge and haven’t had an incident of it falling off since.

I love Spigen, they’re one of the best when it comes to tech protection, so I figured while this item wouldn’t last forever, it would at least make it a year. I got this case on July 3rd and it lasted until October 2nd when it cracked and fell off of my Apple Watch while sitting at my desk. I took the photo right after. I still love Spigen products but this one just didn’t work for me. I’ll have to order the Tough Armor now.

Summary: a great bumper case that broke unexpectedly after 6 months of regular use. To be fair, this Thin Fit bumper installs easily and fits the 44mm Apple Watch nicely. It has a desirable, soft satin finish and barely adds to the size of the watch. When I initially ordered for $14.99, I was thinking the price was a bit steep for such a small plastic part, but when I received the Thin Fit, the quality and finish was exceptional, and I felt better about the purchase. The overall design and functionality is also great. No problem at all interfacing with the watch controls with the bumper case installed. After wearing a few months, I was further impressed that the soft finish of the bumper was resilient to scratches and daily wear. I did not subject my watch to abuse or harsh environments, but for the occasional bump against the countertop, the Thin Fit did a great job, until it just randomly broke one day after 6 months of use. There was no bump or event coinciding with the break, I just looked down and noticed the corner had cracked - exactly on the one of the mold parting lines (there are very fine tool marks in two corners of the bumper). Note: there was no damage to my watch. The warranty/return period on Amazon is only 30 days, and I could find no support for broken product at Spigen's website, so I did not start a case ticket. My take on this experience: except for it ultimately failing, the Thin Fit did a good job at protecting my watch, and for the money it lasted long enough to give another try, so I reordered another. If it fails again in 6 months, I'll try a competitor's product. If it lasts for 9 or 12 months, I'll probably just order a couple more so I have a reserve. The most frustrating part about this experience was having an unprotected watch when the replacement was on the way.

I bought this to replace a similar item with a built in screen protector, as I prefer to be able to interact directly with the Apple Watch screen. This case doesn't have a screen protector built in and for me this is a good thing. The case is low profile, made of a soft touch material and seems durable - I haven't broken it yet! Most importantly, it protects the watch from accidental dings and scratches. The side button protector is hinged at the bottom, so it works best to press it at the top (the end closest to the crown). This isn't an issue for me but might take some getting used to, depending on how you typically interact with the watch. The crown is also recessed into the case, which is inevitable with bumper cases. Again, it just takes some getting used to. Pros: Low-profile, made of soft-touch plastic, allows full interaction with the screen. Cons: None, unless the discreet Spigen branding bothers you.

I've always been a fan of Spigen products. They've always had a good balance of quality, value, and great design. I like this product, but unfortunately, it doesn't work with any screen protectors (rubber, plastic, or glass). It simply will grab a corner and pull it up. I've wasted a few screen protectors trying to make this work. Not the products fault by any means. That being said, I can't believe I'm the only one that wants to do this. This happens if you also have a "skin" on your watch as well. This would seem more obvious though. Installing this is very easy. It's simply and quick. I like this, because it's easy to remove and clean when necessary. It's made of a plastic with a rubber-like feel to it. It seems robust and I have not had any issues with durability. That being said, my wife who's rough on her stuff has already broken hers within a month. As for protection, it works. I wish it were designed to not only protect the sides, but have a face lip and rises on the face where it will accommodate a screen protector. Overall, good build and value, but it falls short on overall protection. I would still recommend, but know if you use it, you will not be able to use any other screen protection for it.

I really liked the slim fit aspect of it. For most protective cases on the iWatch, a lot of them are bulky and unattractive but the Spigen looks great, minimal and does the job. However; I would not recommend that you play sports with it because it can snap off quite easily.

La Spigen Cover Thin Fit per Apple Watch Series 6/SE/5/4 44mm è la scelta ideale per chi cerca un mix perfetto di eleganza e protezione per il proprio prezioso dispositivo. Ho acquistato questa cover in nero, e sono rimasto estremamente soddisfatto della sua qualità e delle sue prestazioni. Innanzitutto, devo sottolineare quanto sia sottile e leggera. La Spigen Thin Fit non aggiunge praticamente alcun volume al mio Apple Watch, mantenendo il suo profilo elegante e originale. La cover si adatta perfettamente al dispositivo, offrendo una protezione completa senza compromettere lo stile. La costruzione robusta della cover offre una difesa affidabile contro graffi e urti, preservando il corpo del mio Apple Watch da eventuali danni. Ho apprezzato particolarmente la precisione degli intagli e la facilità di accesso ai pulsanti e alla Digital Crown, che rimangono completamente funzionali anche con la cover installata. La finitura nera opaca dona al mio Apple Watch un aspetto moderno e discreto, perfettamente in linea con il suo design originale. La qualità dei materiali utilizzati da Spigen si fa notare, garantendo una durabilità che si traduce in una protezione a lungo termine. In conclusione, la Spigen Cover Thin Fit è la soluzione perfetta per chi desidera proteggere il proprio Apple Watch senza comprometterne lo stile. Elegante, sottile e resistente, questa cover si è dimostrata un investimento valido per preservare l'aspetto e le funzionalità del mio dispositivo.

Excellent product. The appearance of the watch also gets enhanced after applying the case on it. And provides good protection.

装着感が良く、本体にしっかりフィットして安心感がある。作りも頑丈で衝撃から守ってくれそうな印象。ボタン操作も問題なく、見た目もシンプルでかっこいい。日常使いに十分満足できるケース。

Je bricole beaucoup, j'avais une Apple Watch première génération en inox, elle s'est très vite griffée sur les côté, bien que l'écran lui est toujours resté impeccable (saphir). Avec ma nouvelle Apple Watch 4 inox mais de couleur noire, je ne voulais plus prendre le risque. Cette protection à un excellent rapport/qualité prix, elle protège parfaitement tous les contours de la montre, elle se clips et se d' éclipse en 1/4 de seconde, ce qui me permet de l'enlever quand je sors. Le plastique est d'excellente qualité, rigide et flexible, elle ne gêne absolument pas le fonctionnement, si ce n'est que la couronne est un rien moins accessible. elle protège également le bouton poussoir latéral et s'adapte parfaitement. De plus je trouve que le look noir mat s'accorde parfaitement avec la montre et le bracelet. (voir mes photos avec et sans protection). Je recommande vraiment. Si ce commentaire à pu vous être utile, merci de me refaire savoir.