COMeap (2-Pack) CPU to GPU, CPU 8 Pin Female to Dual PCIe 8 Pin (6+2) Male Splitter Cable for Graphics Card BTC Miner 9-inch (23cm)

Only needed 1 but hey, now I have an extra. Works just fine, I don't know what these other people are talking about, they must not know what they're doing. Probably using this wrong. THIS IS AN EPS (CPU) POWER ADAPTER TO PCIe POWER FOR GPU's (Video Card Power) DO NOT USE THIS FOR ANYTHING ELSE, IF YOU DO, YOU'RE A M*R*N AND WILL DAMAGE YOUR HARDWARE. You've been warned, don't blame the seller or the company for your lack of understanding. If you need a CPU (EPS 8pin) power adapter cable to get power to a GPU this is it. Worked flawlessly and the quality of the cable is just as good as any other quality cable you might find. Don't hesitate to buy this, if this is what you need. This worked for me in a Supermicro SC846-R900b chassis with the stock PDU that had an extra EPS connector, as I no longer run a dual CPU setup. This cable worked for running an Intel ARC a750 Challenger in Truenas Scale.

Well made

This cable worked well for me. I suspect the people who are saying the pinout is incorrect or that it does not work either did not receive the correct product or did not use it for the properly intended purpose. The purpose of this cable is to enable an *unused* CPU power cable to power a GPU. It adapts the pinout of a spare 8-pin CPU power cable (EPS 12V) to that which can be used to power a GPU. This works well for people using dual power supply mining rigs. The otherwise unused CPU power slots can be used to provide VGA/PCIE power to additional GPUs. The female end plugs into whatever CPU/EPS12V cable comes with your power supply. The male ends plug into your GPU.

Does exactly what it say it does, which is to adapt leftover or unused cpu to dual 8 pcie pin for video card. This is a two pack. I connected the two to my two unused cpu cable on my NZXT C850 as this was for a second psu used for mining. The two adapter plug into both my RTX 3070 and been running for over 2 weeks without any issue. Edit** 11/20/21 - Still running strong. I'm running five rtx 3070 on this C850 power supply using three of the original dual pcie 8 pin. and these two cpu to gpu dual pcie 8pin.

It took 6 weeks of swapping parts to discover that this cable was completely insufficient to power any GPU. It fried the pcie 6-pin port and a second power supply was ordered to replace it. Neither an RTX 2070, nor a puny GTX 460 would spin up with this cable. Additionally, the 8 pin sockets are incompatible with any quality 6+2 plugs. While troubleshooting, I ordered other duplicate components that I was ultimately unable to return. It cost me 6 weeks of productivity on top of the hardware burn. Replacing it with a similar cable at a similar price point solved all my problems. This $15 loom of Satan cost me at least $100 in quantifiable assets, not counting my time. Ultimately, I am responsible for the equipment I plug into my machines, but I can't fathom the purpose of this cable as anything other than a dangerous scam.

Works exactly as described, gives me 4x extra VGA 8pins on my PSUs that aren't powering a motherboard and 2x extra VGA 8pins on my PSU that is powering a motherboard. Excellent construction, works great. DO NOT USE WITH A REGULAR VGA 8pin PSU CABLE. I've seen horror stories online of people forcing these adaptors onto a VGA 8pin, not realizing it's for the 4+4pin CPU cable. Those stories don't end well.

I have servers with PDUs that don't have PCIE connectors. A few chassis are JBODs and I wanted to use fan controllers that require PCIE power. These worked perfectly to adapt a EPS-12v connector to PCIE. These are built well and perform the task.

The ones I received were assembled backwards. They do not match the pictures. They do not match the specification. I not have to see if they damaged my 6 gpus. DEFECTIVE QA. They made a reverse polarity PCIe to PCIe

Very handy for expanding number of graphics cards

Works as advertised, seems to be well made.

Alles gut

Muy bien

Polarità invertite. Menomale che il mio alimentatore va in protezione quando c'è un cortocircuito sennò bruciavo tutto. Ho comprato altri cavi ed è andato tutto liscio.