Install Bay ABS116 ABS Universal 12 X 12 X 1/16-Inch Each

I used these sheets to repair the front panels on a 2016 Forest River Work and Play toy hauler. The panels were cracked in multiple places and two mounting points were broken off where swell latches hold the panels onto the RV. The sheets were textured on one side, but the texture did not match the RV panel texture. ABS can be dissolved in acetone to create plastic glue. The ratio of ABS product to acetone determines how thin or thick the dissolved ABS will be. I made my two batches to be a little thicker than Hershey's chocolate syrup - so it could be brushed on. The cracked areas were treated to three applications on the inside. The missing swell latch mounting points were a combination of small sheet pieces cut to fill in the area with multiple applications of plastic glue. After all the repairs a fresh coat of good quality spray paint made the panels look new again. Note: the swell latches are available from Southco, which is the original supplier to Forest River, at the best price anywhere.

Bought these with an eye toward cutting and punching them to see as spacers behind my video stand, as there's so much space with the glass shelf holders have too much space. I have already done this with the matching stereo tower and the spaces have shrunk to the point where it's a breeze to slide in the shelves and tighten down. It's a tedious process. The ABS material is stiff and tough. However, the labor has paid off very nicely. Have a sheet or two or three around might come in handy in any number of purposes. UPDATE: Still cutting from first sheet. Using it to fashion spacers to fill gaps between deck railing connectors and two by fours that I managed to cut just under an eight of an inch short. A spacer at each end solved the problem. Love this stuff!

This is a high quality ABS sheet and I am very happy with it. Being only 1/16th thick, it has a bit of flex to it which is just what I needed for one are of my project. I also used a 1/8th thick sheet in other areas where I did not want the flex. Beware however that the panel I received was slightly under 12 inches. This was not an issue for me, but if you need the full 12 inches for whatever you are working on, you may need to buy a size up or look for a different brand.

This is nice to use when you want something other than acrylic or polycarbonate. Cuts easily with a band saw or even a utility knife. The best way to cut it is with a sheet metal shear if one is available. The only down side for me is the coarse texture on one side; the other side is smooth.

I bought this sheet of ABS plasic in case I needed a custom piece of plastic for various uses in the interior of my vehicle. Sometimes I need a piece to secure a panel-mount connection, or cover a small gap or opening. It's easy to score this with a razor knife and break it to the size you need. As a 12x12 sheet it feels flimsy, but when you're dealing with smaller pieces it's actually quite durable. It's pretty thin, only a couple millimeters thick, but that means its easier to heat with a heat gun and bend if you need to.

Somehow, I was the unlucky recipient of an uninvited rock hitting the lower grill of my car. The hole had a diameter of about one inch. Of course, the grill itself priced out at about $275 and installation of $150. I immediately started looking at alternative ways to repair that would be presentable. Fortunately, the grill plastic is a matt black similar to one side of this product. The opposite side is a smooth glossy surface. I bought some black bonding epoxy like two part adhesive from a local auto repair shop. With an exacto knife, I cut a section of the plastic about an inch and a quarter by two inches. Cleaned the damage area and roughed up the back side of the piece of ABS plastic, beveled the edges a little, and bonded the piece over the hole. Unless you know where to look it actually blended in quite well. The product was incredibly easy to work with and my total cost including the epoxy was less than $25. I couldn't be happier. Highly recommended for those occasional repairs that don't warrant a total replacement part.

Used to repair a cracked motorcycle fairing. Cut to size and welded in place. Works great now, very sturdy and hardly notice there was an issue after painting and clear coat. Very good value for small qty material purchase. Note one side is textured, one is smooth. I forgot to check annual dimensions vs nominal.

I needed durable plastic that I could mold into a weird shape but flexible enough to be moved repeatedly without breaking. This stuff was absolutely perfect. It's pretty easy to cut with a regular pair of scissors to a general shape. Soft enough to sand easily to get rid of sharp edges. Incredibly easy to mold into shape if you hit it with some heat and it holds its shape really well afterward. I also love that one side is textured for grip/aesthetics. I am ecstatic with this stuff and would absolutely grab it again.

This board is the perfect thing you need to fit a radio, GPS, or other unit in your boat, R-v, dash, whatever ! Cut it like you wish, make fitment, and that's it ! Very nice looking finish, sturdy, light weight . I love it !!

Thermo formado para autos

No hay demasiado que decir respecto a una lámina de plástico... Pero el producto cumple con lo anunciado y es exactamente lo descrito. Llegó a tiempo y sin ningún problema.recomiendo al vendedor y el producto. Altamente satisfecho con la experiencia de compra

First, I received the wrong size. I returned it and they send me back another one really fast. Actually, the day after. Fast shipping! You can actually cut it with a scissor, if you don't have any professional tools.

Incredible product cuts easy and holds glue very well awesome product for any fabrication work