Glossy DVD+R DL

I am happy with these. I burned total of 42. I printed 8 before burning. Then I found out not to do it that way. All 42 were ok, except that with the last 2 the computer gave me an error saying "files could not be burned. Try another disc" or something like that. However I checked the discs on a different computer and they were fine, all the files were there. Now, these two were burned on a different session, a different day, starting the transfer from dragging files with WIndows 10 Home. So I don't know what's gonna happen when I try disc #43. I will update this review. About the printing: The prints were very good. I had been using Verbatim AquaAce, which I don't have a problem with, but they don't make glossy DL. PlexDisc are glossier. If you look at the sample photo you'll see the difference. The one on the right is a PlexDisc. Verbatim is more of a semi-gloss. Both are waterproof and look professional. Label says 8X speed but when burning I only had 4X and 2X options available. At 4X it took 28 minutes to burn over 7GB of photos. COMPUTER: Lenovo Idea-PC with an i5-4430 and Lenovo Super Multi-Burner DVD±RW (±R DL) / DVD-RAM drive - Serial ATA - i. PRINTER: EPSON XP-830 photo printer with EPSON genuine ink.

I certainly won't buy from this seller again. I purchased two spindles of blank discs in December 2021. When trying to burn files to the discs, I received many errors and out of the 100 discs I finally wound up with a total of 16 that were any good. I sent an inquiry to the seller. The seller's response was, basically, "Well, that's too bad. You must have done something wrong. Can't help ya." This is one of those sellers that does not take responsibility for their products and if anything goes wrong the first thing out of their mouth is to blame the customer. I burn discs daily for many customers and I have been doing this for over 20 years. I typically go through a hundred discs per month, sometimes more. I receive a patronizing reply from the seller, saying it's my fault and then saying I wasn't burning the discs properly and I should read up on some info on how to burn discs (provided a link to a website). Really? I have always followed the manufacturer's recommendations for burning speed. I have three disc burners and I received failures of these discs from each of the three burners. Each failure on each disc was at the layer break. This is typical of a bad batch of discs. I originally purchased these discs because I had received a spindle of the discs with the glossy finish and my customers were very impressed with the quality of the image for the disc label. There are other sellers of this product. I have purchased many of these spindles from the seller "RunTechMedia" and I have not had very many failed discs. I expect a few every now and then, but with the discs I receive from RunTechMedia I usually have no failures in a spindle, or maybe one or two at most. This seller "genesysdtp" is not a seller to be trusted. You are taking a risk buying from this seller. You may get good product for a while, but if you ever get bad product, forget trying to get any resolution from this seller "genesysdtp". You'll be better off buying this product from a different seller.

Colors are vibrant when printed. They have a very nice glossy finish that can easily be wiped down should something spill on the printed surface. Burn quality is also dead on, ( I use a Pioneer XL Blu-ray writer, at a burn rate of 2X,) and have never had a coaster out of several hundred I've purchased unless it was due to my negligence, If you choose, they will print from the outer edge to the smaller inner circle. Where were these discs 10 years ago? i get the same results with the 4.7 GB and 25 GB discs respecfully and I will continue to buy these discs from now on. Highly recommend!

Works great, the is print look great

These are the best discs with the best looking finished product label....

printable works GREAT unfortunately only 2 out of the stack were recordable... would give it zero stars if possible.

Very happy with glossy labels for printing & the burning of the discs. I’ve used all but 5 out of 50 and had no bad ones.

I bought these a year ago. I thought I had used them and ordered more. The new ones came in a envelope with broken spindle. I attempted to use them. 100% failure. Found the original order that I thought I used. Apparently not, those All fails too! Maybe 1 at a time will work on a single burner? My duplicated says No! Verbatim All the way!!