SALT-3000 Meter, Digital Salinity PPM Temperature Tester for Salt Water Pool and Koi Fish Pond

Works great to help maintain the salt level in the pool. Accuracy is close to what the pool company measured. +- 200 ppm

Per the Product description, this TDS-4 TDS Meter (Made by HM Digital) has been calibrated at 300x10 ppm TDS (using a water + salt calibration solution). Thus, it has been given a new part number - TDS4TM-3000. TDS does not mean Total Dissolved Salt, but if you add enough salt to tap water to have 3000 ppm, this meter will read about 300x10 (3000). Nothing in your pool water will add more than a few hundred TDSolids, so you can rely on this meter to give you an accurate measurement of salt in your pool (ppm), may as well call it a salt meter.Yes, you can use any TDS meter to read your pool salt ppm, but as stated on the manufactures' website and on the packaging, the standard TDS meters are only calibrated at around 342 ppm. Your pool needs to have about 3000 ppm for the SWG to work correctly. Your digital meter should be calibrated with a standard that is close to the value you wish to measure (in our case, 3000 ppm) If you opt for a cheaper meter, be aware that it may not be calibrated to read at the 3000 ppm range accurately.Because of the 3000 ppm calibration, this meter will work great from around 2500 to 3500 ppm (salt), but don't expect it to be very accurate at low values, like for your tap water.TDSMeters.com has a pretty good explanation of how TDS meters work, and how they are calibrated.Photos of the product are attached, showing all the literature that comes with it. The meter arrived quickly thanks to Prime Day!

Seems to work just fine: read 3270 ppm in my 15,000 gal. above ground pool (Intex 32' x 16').Pros:* Great value* Battery included and pre-installed* Easy to use* Accurate* Reports water temperature too (in both Celsius and and Fahrenheit)Cons:* Small display/digits/graphics (especially the "x10" icon)* The "Hold" button could be in a more useful place (e.g. the butt end of the "pen")* Not water proof, so if you accidentally drop it in the water (e.g. while trying to hit the "hold" button) - oh well!* Would be nice if it read/reported *both* the salinity and the temperature with a single dip/sample

So simple to use and so very accurate. Made a good construction and very good quality. Lightweight beautiful to look at it very easy to read. Gives an instant reading and you can wash it off very easily afterwards. It is a necessary item to have if you own a pool. You cannot depend on your salt cell generator to tell you the amount of salt this thing confirms it and gives you an accurate reading.

Not a happy camper on this one. Died after 3 weeks. New batteries no help. Return policy is ship back to vendor at self cost. For $20, I'll just buy a different meter.

Needed for a salt water pool. Works perfectly as described. Easy to use.

I measure the salt every time after I do a cleaning of the pond that adds about 10% new water. At first I thought the accuracy was fine as we had brought the pond up to just over 400ppm to get rid of some parasites as the weather warmed. But when I measure, I get a variety of readings ranging from 485 to 395. I'm going to buy another testing kit to see if it is better.

Easy to use and accurate, as far as I can tell.

Simple to use. Does the job

Should have had one years ago for treating my koi pond , when doing a partial water change you can’t accurately know how much salt is in the pond without a meter like this.

It is not very accurate

Don’t buy - stopped working and only used it once!

Easy to read, works very well