1808

I purchased this window for my sister and had Amazon deliver it to her address as a gift. She needed a window at this size. I almost didn't want to buy it because of the inaccurate bad reviews. This sturdy heavy weight window is fit perfect, is well built, easy to install, matches her exterior/looks stylish, great price, and opens and closes well. We can't thank you enough for offering this window on Amazon!!

I installed four of these last summer. So far, no issues. The install was easy, they look good on the house, and all of them open easily. I recommend they for those awkward crawl spaces with small window openings.

Great addition for glass block projects.

Perfect for adding a small window in our shower.

Happy to find this item. I’m using it to create a seasonal vent / airflow for a large double hung window that weighs a ton and doesn’t have screens. I’ve built a frame to fit the space out of pvc board and it’s coming out great! I’ve attached a pic. I’ll cover the open rectangles with plexiglass. In the fall, I’ll simply remove this and close the window before snow flies. Voila! Fresh air whenever I need it.

Good quality operable window. We are using these above interior doors as transom windows to help regulate the minisplit air conditioning. They also look great after door trim. Great job! Alot less $, BIG interior design appeal and functions well for air flow. Love ya

The window openings in my basement were filled at some point with glass block. It always drove me crazy that there was no ventilation down there. A year or so back I had someone take a look to see what it would cost to put in basement, sliders or hoppers and I think it was like $600 or $800 a window installed, which is probably not terrible as it’s a lot of work breaking out the block and reframing. Instead, I thought I would tackle the project by installing these hopper windows for a little bit of ventilation. Firstly, I’d say I’m pretty handy and I’ve learned quite a bit from YouTube. Not sure what we did before that. Essentially what I did was used a concrete bit to blow holes between the glass block joints as I needed to take out two blocks as you can see from the pictures. Needless to say make sure you wear safety glasses and I should’ve put something on my face as I did get some glass and concrete chips shooting back. I would also say depending on the gap in the joints if you’re doing something similar is to use a bit a little smaller mine was 5/16 and it ended up cracking one of the blocks. You could also see the picture of the mortar that I used. You just mix it right in the container. Was just enough for one window. I basically just laid the mortar down and put the window in and leveled it and then filled around the sides in the top. I still probably have to do some caulking and I’ll use that gray mortar caulk but for now it looks good and I highly recommend the window. it will probably take most people three or four hours I would think.

I built a small laundry room next to the bathroom with a wire shelf and a rod for drying certain items. I framed with 2x4s and insulated and also used sliding mirror doors with a light inside. I wanted a way to let some light out so I could do laundry more easily while others sleep. I also wanted a way to vent moisture and if a window ideally any lint could be could be caught. Also, something that helped reduce escaping sound. This window checks all those boxes. I installed it high just above the sliding mirror doors centered. I shimmed in an opening with about 1/4 to 1/2 inch gap all the way around. I predrilled holes, 2 on each side on the inside of the vinyl frame of the window where the screw heads would not interfere with the opening and closing of the window and the screw heads would not be visible from the outside. I used long white headed cabinet screws to secure. Then I used great foam window foam to seal around the window (and around framing for the sliding glass doors). Great foam is tricky, had to cut the straw to get appropriate flow. Used a vibrating multi tool and utility knife to make foam and shims flush with vinyl window frame. I sheetrocked to the rough opening and I plan to trim with shoe molding or quarter round or similar. It works perfectly and the screen will even serve as a lint trap for when I'm drying something and venting moisture. It sufficiently blocks sound when closed. I wrote this review because I wanted a similar review to help me but I didn't find one.

Joli et fait le travail en plus d'un excellent prix!

This hopper window was a perfect solution for my project. It arrived promptly and came with a nice little kit to add a frame around the outside of the window. Very satisfied.

Installed in my shed and allows light and airflow, I’m glad I bought this product

Works and looks great

Good in quality, nice and fine made.