Question 1

Due to the small tank, does it constantly cycle running a 1/2 inch impact wrench?

Accepted Answer

Time to do math, this tank is a 5.2 Gallon, my 1/2” impacts consume from 4cfm on the low side (flex head 400ft/lb wrench) to 6.5cfm (top of the line 900 working/1600ft/lb bolt breakaway). I got compressor for its recovery speed, you can further reduce the noice many many ways, YouTube it, but every gallon only gives you .134 cubic feet, so this 5.2 gallon gives you .695 cubic feet of air. Low end wrench at 4cfm, 4 whole cubic feet a minute means .067 cubic feet every second, figuring how even if you turn the compressor off (so it doesn’t turn back up and start recouping) you’ll get around 10 seconds of air, 10x.067=.67 and you got .695. Now your compressor will kick on long before it gets that low and this isn’t an absolute perfect measure by any means cause your psi won’t be steady 24/7 but gives you an idea. This thing doesn’t have a huge tank but does have a very good recovery time for this price point (won’t find any sub $500 ones over 6cfm) this is meant to still be moveable, despite 75lbs but with the wheels and all it’s doable. If you’re goin for a shop compressor that won’t run often due to a 20-35gallon tank I mean this portable one shouldn’t be in your field of vision

Question 2

Is it made in China or Taiwan? Where is the manufacture origin?

Accepted Answer

on the rear of the machine, down low between the wheels, mine says made in taiwan. good machine so far.

Question 3

Can the female air couplings be unscrewed and changed out for high flow couplings, or are they not removeable?

Accepted Answer

Yes, I did exactly that. They are 1/4" male NPT, meaning the compressor manifold has two 1/4" female NPT connections. I replaced them both with high flow fittings which also accept the normal flow quick connect fittings and this was very easy to accomplish. This is a great compressor and I am very happy with how durable it is built & the ability to add on functionality to it.

Question 4

has anybody used this compressor with a plasma cutter that requires 5-7cfm(90psi) ?

Accepted Answer

I use it with an Eastwood 40 cutter rated 5-7 CFM at 20-60 PSI and it works fine. I haven't cut for lengthy periods(short cuts only,) the compressor runs a lot but it works. Make sure you get an air drier for your air line.This is a great little compressor, but if you're plasma cutting, you're probably doing other things too so I would put the money to a larger 60-80 gallon 10+ cfm compressor which is much better suited for garage tool use. I use this little compressor for everything though (blowing sprinkler lines, small media blasting cabinet etc.) I'm always amazed at what this little thing can do. But it runs constantly and after I burn it out, I will buy a much larger compressor more suitable for tool use.

ASIN	B0001Q2VPU
Additional Features	Silent Operation
Air Flow Capacity	5 cfm
Best Sellers Rank	#290,545 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #253 in Portable Air Compressors
Brand Name	Makita
Capacity	5.2 gallons
Color	Factory
Compatible Hose Diameter	0.38 inches
Customer Reviews	4.5 4.5 out of 5 stars (912)
Global Trade Identification Number	00088381053549
Included Components	Compressor Oil, Coupling
Item Dimensions L x W x H	29"L x 19.5"W x 19"H
Item Type Name	Makita MAC5200 3.0 HP Big Bore™ Air Compressor
Item Weight	75 pounds
Manufacturer	Makita
Manufacturer Part Number	MAC5200
Manufacturer Warranty Description	1 Year Parts & Labor
Material Type	Cast Iron
Maximum Horsepower	3 hp
Maximum Power	3 hp
Maximum Pressure	140 psi
Model Name	Makita MAC5200 3.0 HP* Big Bore™ Air Compressor
Model Number	MAC5200
Noise	65 db
Number of Items	1
Power Source	electric-powered
Recommended Uses For Product	Cutting, Grinding, Spraying
Style	MAC5200 air compressor
Tank Volume	5.2 gallons
UPC	088381053549
Unit Count	1 Count
Voltage	120 volts

MAC5200

Details

Details

Description

Specifications

Common Questions