Universal Waste Siphon for Sink Pipe Connector 32 or 40 mm

The product is exactly as described. The 1 1/4" fitting has a high quality washer and sealed first time. The 40mm/32mm sizes are also exactly as described. It fitted well into 40mm compression fitting that I used but as "32mm/40mm" fittings are actually not that size, varying with the manufacturer and type of fitting (glue, push fit...) you may have trouble fitting it into anything other than a compression fitting. Not the waste trap manufacturers fault just our mad plastic pipe sizes. For example it looks like "32mm" is actually between 32mm and 36mm depending on what pipe and fittings you are using and that's before you look at 1 1/4" vs 32mm etc. A search on the web for "plastic pipe sizes" explains all of this.

Great product, all local plumbing suppliers didn't have what I needed and this was exactly the thing to finish the sink. Easy to fit and made the connection between a smaller and larger pipe.

Should do the job it's needed for

This flexible waste solved a difficulty I experienced lining up the sink to the waste following installation of a new cloakroom suite. However it proved a little awkward to get a seal to the sink outlet. The product includes a two coloured washer for this purpose but in my case it would not seal completely. The get around in my case was to use a flexible seal of the sort supplied with certain pipe fittings. I admit in this case the situation was made complicated by the lack of access as the sink was already fitted, this might have been a factor in the slight seepage.

I had to replace the pop-up plug in my sink, which turned out to be too short for the pipes to connect properly - around 5 cm difference ( I know, I know...) I am lazy so didnt bother taking measurements and just decided to buy the flexi waste. Arrived the next day, my sink is now up and running. Yay!

Don’t come with the goggles-like bracket. Second biggest diameter is not 1 1/4 inch, it was smaller. Quality control does not exist at this company. Avoid buying it!!

Easy fit waste pipe.

Excellent product and service

Bei unserem Doppelwaschtisch sind die in der Mauer installierten Abflussrohre leider nicht mittig mit den Waschbeckenabflüssen montiert. Aufgrund der engen Raumsituation kann man gewöhnliche Siphone deshalb nur mit einigen Bögen an den Abflüssen anschließen. Mit diesem flexiblen Siphon ist die Montage absolut kein Problem. Er lässt sich leicht biegen und bleibt dann in der eingestellten Position. Das Ende des Siphons kann man durch Absägen von 40 auf 32 mm reduzieren. Eine kostengünstige und einfache Variante, um bei beengten Platzverhältnissen einen Siphon zu realisieren. Die Rippen erfordern aber natürlich einen erhöhten Reinigungsaufwand.

Good quality made in Czechia

Très bien pour réparation rapide

Es tal lo describen, cumple su función, bueno, me saco de una apurada. Fácil montaje.

Perfecto