X-BULL New Wireless Winch 2 Remote Control Kit Handset Switch Car ATV SUV 12V

Easy to wire up - works well

Work great has a small lag but works great for winches or hydraulic over electric controls

Easy to install. My utv came with a factory winch controlled by a momentary toggle switch in the dash, not wired controller or wireless either. Brp options were pricey and not plug and play either. What I did for this one is placed the receiver behind the oem toggle switch and used wire taps to have this wired in parallel with the switch. Now can control the winch either by my switch in the dash or with these wireless controllers.

Great remotes. The one the winch came with stock got dropped and then run over so needed a replacement and these worked great. Easy to install and havent let me down. Good precise control in and out as pulling or lowering. Does exactly what I have been needing and the battery life seems to be very good. It was my one concern since it does not come with rechargeable batteries or any kind of USB connector for charging. But I havent needed to chamge them yet and I have put these through the paces.

I added these to a 12k# winch and a 4.5k# winch and initial testing shows they work well. The receiver is well weather sealed and the transmitters also work well.

Easy install but did not work out of the box. Only clicked and did not supply enough current to winch contactor to engage. Verified with meter.

I installed this on a 2022 cfmoto zforce 800 trail. I broke into the vehicle side of the wired remote harness. Used some test leads to do a test connection, figured out which wires needed to connect to the vehicle wiring. The receiver is wired hot so it will be on continuously. I did not test the current draw, wish I would've. But, it can't be much and the cfmoto needs a battery tender connected all the time anyway. If I find it to be too high I'll wire in a disconnect. The remotes use 2 aaa batteries and have a power on/off button. Also, the remote will automatically power off after 2 min 30 seconds. I did wire it so that the wired remote is usable. Very happy with this purchase.

Remote works great. Two problems. 1. The screws you need to remove to change batteries are not stainless. The heads rusted out. I had to drill them out just to get to batteries. Then replace with stainless steel screws. 2nd problem. The remote turns off after 30 seconds. After to restart it to often.

Good