Milliput Epoxy Putty White

I purchased a flat with double-glazed windows with white, plastic frames. The previous owner or perhaps a tenant, had drilled holes in the plastic window frame; presumably to mount a curtain rod, which is a rather silly thing to do but there you go. I used this product to fill the holes that were left behind after the screws were removed. The product has to be thoroughly mixed and then applied quickly before it begins to harden. I pressed it into the holes and smoothed it down as best I could with a metal putty knife and a bit of water. I allowed in to cure for a couple of days. The surface was then solid and fairly smooth but a bit rough to the touch. I then smoothed the filled areas further with some very fine sandpaper. The filled areas are now quite smooth but more dull in appearance than the original surface of the window frame but nothing that is particularly noticeable to a casual look. If one was super fussy, I supposed they could find a polishing compound to make the surface as smooth ans shiny as that of the original plastic frame but in my opinion that is not necessary. I don't think most of us look at are window frames that often or with a particularly high degree of scrutiny. I found this to be a good product that did what I needed for a fair price. Five stars out of five.

Everybody should have this product. Easy to use and very versatile. Used to repair small cracks on exterior patio tile. Water and weather resistant. Also used for repairing a pottery figure. It worked perfectly. Easy to paint when dry. Very strong.

Milliput quietly brilliant—you end up reaching for it more than you expected. It starts off satisfyingly sticky—ideal for actually gripping what you’re fixing—then sets rock hard and, crucially, waterproof. Splendid for anything from chipped ceramics to outdoor repairs. The texture is smooth enough to shape without a wrestling match, and the white colour dries clean bright white. And the value? Remarkable. A small pack that seems to fix half your life before it runs out—Practical and dependable.

Used to repair a UPVC Back Door that was damaged by a break in. This was a great solution after thinking the door would need replacing as it had been jemmied open. There was significant denting and tearing to the edge of the door in the lock area. Using a Dremmel I was able to cut and grind away the jagged bits and then use the putty to mold into the distorted and missing frame areas. I'm no craftsmen so it wasn't a perfect finish but the door went from being clearly broken in to hardly noticeable unless inspected closely. Great stuff and at the price an amazingly cost effective solution. Easy to prepare and use and tidy up. Can be sanded and ground down once hardened and presumably there are paints that could match it up to the glossier upvc but I didn't bother as its close enough in my opinion. Highly recommend.

Following a leak above our bedroom window, we were left with a lintel that had lost some of the plaster from the edge creating an uneven surface. Having been unable to find someone that could fix this for me, I had to find an alternative solution. Having read the description of this product, I thought that it might just do the job. I mixed the two products together as per the instructions and moulded around the uneven lintel. When it had dried, I simply sanded the area to produce a sharp edge and voila! Mixing the two putties together was quite hard work on your fingers but I'm so happy with the end result. Easy to use, quick to dry and solid result.

Oh boy, this is wonderful. This is the best for me personally, from an accessibility standpoint, and for the projects that I needed/need to do. It is a bit difficult on the joints, but overall much nicer than impossible-to-open wood filler cans (Much more difficult to open than paint cans. One has bent my metal filling Knife). Very easy to work with. But need to work quickly, as it starts to harden within 10 minutes. I mixed for about 2 minutes, instead of the reccomended 10 minutes, for this reason. The result was just as great. Easy to sand, and sands lovely. Easy to make flat like this, but impossible to make flat when applying, so leave a little bit extra on top to guarantee flatness when sanding. Easy clean-up (Dry cloth, and then wet cloth). To measure out and store I suggest cutting the amount you need with scissors while the pavkaging is on, setting aside, wrapping cling-film around what you will be storing, and putting both in a plastic zip-lock bag (Make sure it doesn't have holes or tears). Then back in the product packaging. To fill holes, I would reccomend to make it into a tube, put in gently as far as you can, and then repeatedly push hard with your thumb to pack as much product in as possible, even when it looks full to the top / overflowing. Just keep pushing hard, and then when the product stops going in scrape off the excess, and leave a thin overflowing layer.

This is a great well designed product but it seems so silly to provide the clay in a single bag within this box. If like a lot of people you need a tiny amount at any one point to fix a chip you aren't going to use most of it and then it runs the risk of drying out.

Excellent versatile product. Used on a porcelain repair with excellent results. Also used for some modelling repair on resin Christmas scene decoration. Also great results.