IP65 Fixing Clips

They do the job and they do it fairly well. The screws are quite small and fiddly to get in place if you got sausage fingers. To counter that, predrill a small hole, can't remember what size bit to use, figure it out yourself... That should prevent any wood splitting/bulging and allow you to push the screw in a tad, rather than dropping it on the floor... I managed to loose 4 screws that way... :/ The transparency is fine as they are less obvious if in view, but make sure you don't put these directly over the leds themselves, the plastic will throw the different colours in different directions. Not by much, but if you see it, it'll annoy you. You'll need a pz1 screwdriver bit if you plan on using a drill for screwing these in, amazingly I found one next to me without looking, first and last time that'll happen >_> Overall, they do what they say, much better than relying on the rubbish adhesive backing or other janky methods I was trying! Though they only have one screw per fixing, if the screw is done tight, it's a good fit around the waterproofing case and holds well.

Excellent

A bit fiddly at first but once you get the hang of it easy

Excellent quality. Easy to apply. Clear, durable product that blends into any surface. Good value for money.

These clips are quite small by necessity, which can make them and the screws a little fiddly to handle. It's worth having a bradawl or something to create a pilot hole. You'll need to hold the LED strip, the clip, the screw and the screwdriver all at the same time. I tried fastening the clip loosely with the LED strip laying off to one side, then putting the LED strip in place and pivoting the clip over the top. This method is prone to breaking the clips. They don't have the same flexibility and break resistance as the more common cable clips, but those clips are not transparent nor a good shape to hold LED strips. I'll certainly buy this type again, just took a little time to find a speedy work method.

Re: VIPMOON 100pcs Mounting Brackets Clips for 10mm Wide IP65 Waterproof 5050 LED Strip Light, Screws Included Ordered this along with RGB weatherproof strip (10mm wide) and so glad I did. The strip came with a really sticky adhesive backing which did stick well to a timber arch. However, I decided to put one bracket across each of the copper cut lines just in case the backing strip comes loose over time. A 'Belt and Braces job' you might say but really pleased with the end result and actually the brackets make for what looks like quite a professional job though I say it myself!

Worked good in My Kitchen

Having tired various types of led strip clips these have been the best

Fijne clips, doorschijnend zodat ze minder zichtbaar zijn. De schroefjes zijn erg mini, daarom heb ik de clips geplakt met secondelijm, dit ging prima. Mijn ledstrip hangt weer mooi vast langs de trap.

Oltre l’aspettativa

TUTTO OK

Ottima soluzione per chi ha delle strisce LED con larghezza standard da 5mm e vuole fissarle senza spendere per profili in alluminio e relativa copertura in plastica. Installazione semplice: con la vite fornita si fissa la clip al supporto (consigliato profilo in legno, oppure di alluminio dopo però aver praticato un piccolo invito con il trapano) e poi con una leggera pressione si incastra la striscia alla clip. Per un'adesione più completa consiglio comunque di sfruttare l'adesivo che di serie viene fornito con tutte le strisce ed utilizzare questa clip come misura ulteriore. Non sono però adatte alla strisce LED da esterni con copertura in gomma, dal momento che non riescono ad esser bloccate.

Nette levering en passende klemmetjes. Inclusief schroefjes!