Cold Smoke Adaptor

Brilliant for cold smoking

Before I bought this I read some negative reviews. Having inspected it on arrival it is of very good quality, there were concerns about the flexible pipe in reviews upon inspection there is nothing wrong with the standard of it. Maybe the pipe has been upgraded at some point, but having used flexible ducting in a Professional capacity if handled with care this product is good.

It's a bit fragile, but it does the job perfectly.

Works perfectly allows cold smoke without having to use ice in bottom of bradley smoker to keep temp very low.

Hi use the product all the time so my old product got very old so I had to renew it

Great delivery. Smoker as expected of had come direct from brand.

does its job. But a bit disapointed by the price. You could make your own one of these for about £20 with bits from BnQ. the clip for the tube at the smoker end is pretty poor and it pops off regularly.

The aluminium tube was damaged as it came out the box , very flimsy

Parfait s'adapte très bien sur mon fumoir pour faire de bonnes recettes

Should have got this ages ago, it makes smoking cheese so easy (actually... almost too easy!) The cheese of all types (we did 5 different types as shown in the picture). No melting, no dripping cheese bits, no deformed pieces, all nice and cubed up as I cut them! Very, very impressed. Now to wait 2-4 weeks is going to be the only hard part. For instructions, don't bother with the ones sent from China, they not overly accurate or complete, simply go to YOUTUBE, most are good enough to get it hooked up. The trick is to make sure you disconnect the power and sensor from the main smoke chamber, just attach the metal vent hose plate (make sure it's elevated as in my picture for best results) and be sure to disconnect the heat sensor wire and attach the little gizmo they send to bypass it. Easy to set up. Simply amazing results first time used! Thanks BRADLEY!!

I bought this unit and the matching Bradley smoke generator. The unit comes with the smoke box that holds a quenching pan for the ashes that are ejected out of the generator. I used a stainless steel dog bowl that fits inside the cabinet perfectly. I did not fill the bowl with water, and it worked fine. The box and flanges that come with this unit are good quality sheet metal. The pipe is very light gauge aluminum and is easily torn, kinked or punctured. Be *very* careful during assembly and attaching it to your smoker cabinet! I used double-walled adjustable elbows, like the kind used on water heater and furnace chimneys to route the smoke pipe around the back of my smoker cabinet. This protects the flimsy pipe from damage from passers-by and pets bashing into it. I recommend you do the same. I do not consider the pipe's fragility to be a design flaw. The pipe really does need to be light gauge metal, since its purpose is to radiate heat, cooling the smoke to near ambient temperature. Luckily, you can buy replacement pipe like this from Home Depot if your pipe is damaged. You can find it right next to the elbows. I drilled holes in the elbows I purchased separately and used small self-tapping screws to attach them to the flanges that ship with this unit. It made a professional-looking installation on my deck. The elbows I bought have several sections that can be rotated to produce anywhere from a straight pipe to 90 degree bends. This was invaluable to making the install a breeze - I was able to get everything aligned in just a few minutes, without putting too much stress on the aluminum pipe. Don't try bending the pipe around sharp corners! The fit and finish on this unit is good. Very little smoke leaks out from the box or flanges. There is a magnetic latch on the door to the box, so that you can inspect the heater on the smoke generator and empty the ashes from the quenching bow located inside. The latch does a great job of sealing the box so that no smoke gets out. It was a bit tough connecting the generator to the box. I had to bash on it a bit to mate the smoke generator's mounting lugs with the slots on the adapter box. I am not sure if the paint is too thick or there were tolerance problems at the factory. Use a shot-filled mallet if you run into the same problem. :-) You gotta try this thing if you like cold smoked fish, home made bacon or other cured/smoked meats. The results are amazing!

Avendo il loro affumicatore 4 rac aspettavo solo che il prezzo scendesse per comprarlo. Ottima qualità e ottimo prodotto, consigliato.

Sehr gutes Teil zum kalträuchern! Klappt sehr gut! Ich kann den kompletten Räucherofen nur empfehlen. Habe bereits 3 Stück gekauft, da ich damit professionell arbeite