Graphene Coating

I was very skeptical about this product but its definitely true ceramic coating. When it dries on microfiber cloth the cloth solidfies indicating that this product actually crystallizes. Not sure about the hardness or longevity though. Here are steps you can follow: 1. Apply using the applicator provide 2. Once it flashes take it off using a Microfiber. Don't worry too much about this. Doesn't have to be perfect timing and you'll still get good results. 3. Try your best to leave a streak free finish without high spots as you wipe off. But again, don't worry, the product will self level over the next 24 hours and you can wipe of any remaining high spot even 24 to 48 hours after application. 4. You'll need at least 10 microfiber cloths for a mid sized suv as this product saturated the cloth very quickly. Hope this helps!

I applied this myself, first time trying it, but I’d done a ton of research and YouTube beforehand. I did wash, iron decon, clay bar, polish with DA machine, isopropyl wipe, and then applied this. I did a second coat on the hood and roof for extra protection. The bottle had plenty for probably 2 full coats on my small SUV. Tip: it takes a while to dry. Don’t buff it too early or it just comes off. If you wait too long it does get hard to buff off too. I would say wait at least how long the bottle says, maybe a bit more. I put it on a couple of months ago, the water beads up great, and it really did make my black metallic paint appear deeper black. I’ve washed the car (touch free or hand wash only now) probably 6 times and it still beads up the same, and I can tell the coating is staying on because one spot where I didn’t buff it enough there’s a towel smear that I can still see. I put it on some of the plastic and wish I had done all the plastic, it made that appear darker too which has also lasted. Overall great experience! There’s no reason to pay someone to do this or pay for a name brand. Just get this and do it yourself. People have told me mine looks just as good as theirs that they paid 1,000 to have done.

his graphene ceramic coating works great and gives a really nice finish, but you definitely need to pay attention to the flash time and the temperature you’re working in. If you don’t catch it just right, it can be tough to wipe off. Once you get the hang of it though, the results are excellent and long-lasting. Solid product overall.

I would give this product an okay rating for price and a slightly less rating for performance. I know that it is relatively inexpensive and that expectations should be low. Having said that the product is very thin and achieving a thicker coating is impossible insofar as the high end of this type of product. Another challenge is that it is almost impossible to tell when the product has flashed. There is no rainbow effect and you really have to wing it. Maybe some are better at that than I am but I think it’s important to know when to remove the excess as both too soon and too late heavily impacts the final result. I would likely not order again.

hydrophobic, shiny and easy to clean