Standard (Ball Rescuer only)

I’ve been using this Ball Rescuer with a Wilson US Open can, and it works exactly as advertised. The balls hold their pressure much longer, and I’m able to use them for multiple sessions instead of tossing them after a couple of hits. As long as the felt is still in good shape, the balls feel playable and consistent. Setup is simple, and I use a small electric pump to pressurize it, which makes the process quick and easy. Once it’s pressurized, it does its job. This has definitely helped cut down how often I need to buy new balls, so it’s saving money over time. If you play regularly and go through balls quickly, this is a smart, practical addition to your gear.

First and foremost, the Ball Rescuer does really work. It can preserve the liveliness of new balls between uses, and it can re-pressurize slightly dead balls as well. The design is superior to other similar products because the air pump valve allows you to really dial-in the pressure according to your needs (think ball preservation vs reconditioning). Second, the customer service is great. The guys are quick to respond if any issues or questions arise. They went above and beyond to take care of my minor issue. I have owned mine for a little over a month and it has already almost paid for itself. Would recommend (and do often).

It works. But you are limited due to the fact that not every tube works

Overall a good product. It seemed to be complicated to use at first but it actually is a lot easier than it looks. It does revive balls that have been used moderately (not intended to revive old, dead balls, but for preserving the life of new balls, it works well). Try to make sure to maintain this product by lubricating so pressure doesn't escape, and troubleshoot by using a wrench if the device gets stuck on the can.

Worked great for the first 2 months, then started leaking. I tried the manufacturer's suggested fixes, but nothing worked. Now it loses all air in just a few hours. Since I'm past the return window, I’m stuck with a useless product. Save your money and skip this one.

Ball Rescuer at 32lb PSI kept my US Open and Dunlop tennis balls bouncing like new until I could no longer read the print on the ball. I play 3-4 times a week and kept balls like new for over 2 months. Ball Rescuer really works! Love this product … and with an electronic battery powered pump it is so easy to use. Customer Service was so good too, they promptly sent me a lost O-ring no charge when I accidentally lost it. Many Kudos to Ball Rescuer USA.

It holds the pressure on tennis balls really well. You do have to have the right canister. I used Penn's. Dunlop did not work. Assemble as instructed, make sure you tight it well - if you hear a hiss then you know it's not tight enough. A simple bicycle pump would suffice (schrader valve). The included pressure valve indicator is a must to know if air is leaking or not. Balls last easily 10 sessions or more (just up to you if you like to play with balls with barely no felt left). Works better than manually screw on to create pressure type of ball saver canisters.

The ad says compatible with Penn. in the current market tennis balls are hard to come by and penn seems to be the most commonly available on amazon I have tried this with Penn Tour and Penn championship neither work because the metal ring at the top is too large so the plastic ring will not seal around it. I suspect the product works fine if you have the right container but this is 2 stars because it said compatible with Penn but is not. Manufacturer should list known specific ball types or provide a compatible aftermarket can.

No soy de escribir opiniones, pero creo que este producto lo merece. Antes que nada alabar que esto es un invento español... Es cierto que no es una locura de ingeniería, pero da una solución eficaz mucho más económica que otros compresores al utilizar botes de bolas compatibles (head proS, víbora, alguna Kuikma...; no bullpadel, Wilson o Adidas, pero se pueden meter en uno de los otros botes). La idea es muy sencilla, una tapa sellada que sustituye a la original. Metes presión con una bomba de bici (sirve la que tienes por casa) y mirando la altura de la válvula decides la presión a la que quieres conservar las bolas. Para rescatar bolas blandas lo suyo sería tenerlas varios días, incluso una o dos semanas, a 30 psi (el máximo que recomiendan), pero eso ya es más que un bote de antes de abrirlo ya que vienen a unos 15 psi de fábrica. Es decir, que si lo que quieres es conservarlas entre partido y partido, quizás un día a 30 psi para que recuperen algo y luego a 15-20 para que tampoco se vuelvan demasiado vivas y sean incontrolables. Está muy bien porque viene explicado con los colorines del pitorrito y tambien se puede notar la dureza del bote comparado con uno nuevo. A 30 está mucho más duro. No lo he usado mucho todavía, pero indudablemente funcionará bien porque el bote se puede dejar con bastante más presión que de serie. Si con el tiempo la junta de goma pierde lubricación yo le daría vaselina o algún aceite de silicona (más baratos que el pack completo de aquí, yo recomiendo pillar la versión básica). No sé si la bola tendrá 10x la vida útil normal, pero unos cuantos partidos se le sacan. Luego a poco que estés un poco vivo hay gente que tira bolas sin desgaste superficial a la mínima que están un poco blandas... Es que casi que puedes ahorrarte comprar bolas. En el peor de los casos cada bote te durará el triple y con eso ya lo amortizas. Muy recomendable. También un regalo baratito y muy útil para los fans del pádel.

The product is of good quality, it is easy to use and performs its function efficiently, I am quite satisfied.

Le principe est tout simplement génial. Quand on voit toutes ces balles jetées, ayant perdu leur pression alors que le feutre est encore en bon état, c'est désespérant de voir ce gaspillage quand on sait que seulement 15% des balles au rebut sont recyclées. J'ai déjà un pressurisateur (un autre modèle). Des balles de tennis qui ont 7 mois à raison de 4h de jeu par semaine sont aussi "bondissantes" que si elles étaient neuves. La seule limite est l'usure du feutre. L'appareil est vite amorti et permet de sacrés économies d'achat de balles. Le plus: Ce pressurisateur possede un temoin visuel de pression tres pratique et une soupape de décharge pour casser la pression avant d'ouvrir. Il est peu encombrant et je confirme que les tubes de balle (x4) en plastique, DUNLOP FORT ALL COURT et HEAD CHAMPIONSHIP sont parfaitement compatibles. Il faut que l'anneau métal s'insere au plus pres dans la bague. Les tubes ARTENGO et TECHNIFIBRE ne sont pas compatibles , le montage est impossible. Pas besoin de serrer comme une brute, il faut juste "ecraser" le joint pour assurer l'etancheité et pour ne pas l'abimer prématurément. Le serrage est souple et le desserrage tres facile aussi. Les dimensions du joint Torique d'étanchéité sont: 80 x 70 x 5mm C'est un des meilleurs achat que j'ai jamais fait à tout point de vue.

Funktioniert perfekt. Hat am Anfang Druck verloren. Nachdem ich das Gummi wie in der Anleitung beschrieben gefettet habe hält es super dicht, auch über mehrere Tage keinerlei druckverlust. Kann mit zb padox oder Adidas Dosen verwendet werden.

Enkel att använda och håller trycket bra.