Profile Design UCM Aerobridge Computer Mount

This works perfectly for mounting items between the aerobars on our bikes. We have the profile design bars that came standard on our Trek Tri Bikes. We wanted to mount the Quad-Lock system on our aerobars. This got the job done very well. My only mini-gripe is the mount isn't round it's entire length. The mount has two protrusions that stick out wider than the rest of the mounting surface at either end. I assume that this is designed to keep whatever you are mounting centered, but it gets in the way of the larger mounting surface required by the Quad-Lock bicycle mount. However, a quick trim of the corners of the Quad-Lock mount took care of the clearance issue. (Dremel with cut-off wheel) It comes with two sets of mounting loops so you can mount this on either portion of the aerobars. Really simple and seems to be plenty sturdy enough. Update: 11/9/16 - Still love it; my apologies to those who asked for pics of my modification. I didn't see the comments until just now. I'm including two pics. I've not had any problems with this since I first installed. I love having my IPhone right where I can see it. I run the Wahoo app with the Wahoo heart rate sensor chest strap and the blue tooth Wahoo speed and cadence sensor on the bike. All work excellent together.

Looks simple but is extremely effective. I wanted a sleek/aero and clean way that I could mount a phone/computer on top and GoPro camera underneath. My main bars are carbon fiber and flat (oval) so mounting on those isn’t really possible. This little thing didn’t look like much but it sure did solve my problems. Thanks to this little thing, everything is now mounted clean and extremely secure, with no wiggle or play and in the dead center so I’m not making the front of my bike larger in its wind footprint. Will add a photo to this post if I remember.

Would be five stars if it fit a wider gap and wasn't grossly overpriced. Profile Design really dropped the ball on this one. I mean, it works, but you have to have your bars very close together and there just isn't much room for adjustment. On the plus side it feels sturdy and holds things well.

This mount is well made with solid plastic. It comes with 2 size of rings to mount on bars with difference diameters, the smaller pair of rings fits my profile design t2+ aerobars very well. However, I think even it is very good in quality, it is still overpriced, that's the reason I give it 4 stars. I think a price under $15 would be more reasonable. By the way, it does read 3Nm on the back, but I do not see any necessity to really pull out your torque wrench and measure the torque. It is just a plastic bar and you just want to put a less than 100 gram watch or computer on, why that accurate? Just use a allen wrench and feel the force with your hands and make it "tight enough". To be honest I do have doubts that it can really hold 3Nm torque.

Everything I expected from this and more. I ordered the GT Jammer aero bars, but I was already running low on handlebar real estate to put a headlamp and my phone mount. I saw that Profile Design made this as well, but it was easier to order on Amazon since I was getting the aero bars there as well. I would say that when installing the bridge, I actually felt like it seemed a little flimsy/light and wished it was a little wider. However, after I got everything installed, I can't imagine it being any different. Fully extended, it's perfect for my aero bars and is very sturdy when bolted in. I put bar tape on the aero bars and now everything looks seamless and well planned. The bridge is wide enough for my phone mount and actually works out better because sweat no longer drips off my chin onto the phone now that everything is further forward on the aero bars. I'd highly recommend adding this if you have installed aero bars and need some handlebar real estate back.

Perfecta solución para los aerobar

I am using this AeroBridge to mount a Quad-Lock bike mount. Installation was a breeze! But the Quad-Lock doesn't fit exactly perfect... as another reviewer said. I haven't had time to take a Dremel to the mount or the AeroBridge, so I just put it on with the small rubber bands that come with the Quad-Lock and it seems to be pretty solid. I have not taken it for a test drive yet though! I will post a few pictures of the mount now. And I will update my review once I get out for a few test rides!

I would have very much liked these to have worked. However, on my Specialized Shiv (2020) even with my bars set to the closest width, these do not span the distance. Needs longer extension loops.

Lo he comprado para poder llevar mi reloj Garmin en los acoples y va muy bien. Se puede ajustar de manera que se adapta a distintos grosores de acoples y no se mueve nada. Es caro para lo que es pero es recomendable!

Fa quello per cui l’ho acquistato. Soddisfatto! Dovrebbero solo aumentare il range di collegamento fra le due appendici.

fonctionne bien avec mon gps mais un peu juste en course de réglage

Excelent product !

….für mich unverzichtbares Teil zur Montage/Befestigung der Smartphone Halterung, am Triathlon Lenker bzw. dazwischen! Wobei ich auch denke, dass es dem Lenker auch zusätzlich mehr Stabilität verleiht!