DJ Controller Case

Perfect fit for my ddj400 mixer 👌

SImple, bare-bones, functional. Just how I like it. I gave a 3 on durability because they are only semi-hard cases and there is only 1 eggshell inside- I would have preferred 2 and then I could cut out a section or 2. Nothing is stopping me from doing it now except that I want the foam on top to protect the knobs, faders, and footswitches. They look great and are light by themselves. They don't look pretentious or expensive so your stuff might get left alone. They do not lock and you'd have to drill a hole through the zippers (metal pulls) to do so. The zipper track is pretty firm, though, and the zipper pulls are substantial and easy to find in the dark. I may mark mine with some cat-eye tape. The surface is smooth-ish, like 90's CD player or car cases (remember those?). You can write on it with a Sharpie and not wear the tip. The handles are nylon webbing, about an inch wide, but kinda thin, but the grips are a slightly sticky rubberized plastic and easy to grab. All in all, Im thrilled, especially for the price. These cases can hold a Launchkey 25 or similar size Midi controller with some room to spare, a GX-100 and possibly an ME-90, and an ME-80 for all you Boss Guitar multi-pedal owners out there. It would probably hold a Korg Minilogue/XD easily also. Those might be a bit heavy to carry though.

This is a no frills hard case for my DDJ-SB3 DJ Controller. It does what it is supposed to and just works. I like that it's waterproof so when I'm taking it to my brothers house and it's raining, I don't have to worry about it getting wet or anything like that for the brief run from the car to his apartment. The honeycomb foam protection for the top inside is a great addition and really gives me confidence that it will keep it nice and safe from damage when moving it around. The SB3 fits in it with very little wiggle room, and I like the carrying handles on it. They feel well put onto the case and I hope it lasts for years to come. I'd buy this again for sure. You should too!

While this is advertised as a hard case, it doesn't take much to distort the cover. When I read hard case, I think pelican case or at least a decent plastic knockoff. This feels like thin plastic between two layers of sturdy fabric. Don't let this dissuade you though—it's well made for the price point. The zipper is solid, and I feel confident surviving light bumps or short drops while my gear is in the bag. Only the top of the case has eggcrate—which is fine. If you want a flight case, this isn't it. Bonus for me is that it fits my Traktor Kontrol S2 mk3. Like a glove. I was worried that it was going to be too tight based on the measurements here, but it's perfect.

I'm a professional broadcaster and I bought this case for a DBX 286s (audio compressor) that I bring with me on the road. The case is light which really helps because I have two other cases that are heavy which I have to bring with me as well. At first, I was worried about the durability because I store my equipment under the bus in the cargo hold with several other bags of gear and hard cases. It's been serving its purpose for well over 6 months and I couldn't be happier. I love the fact that it's water-resistant because our under-bus cargo areas are not the most air-tight areas and can often let water in if it's snowing/raining. The only gripe I have with the case is the foam only being on the one side in the interior. I added more of my own for 360-degree foam protection.

I know it says hard case, and it is, because it's not soft like a gym bag, but it's also not hard like plastic luggage. It's hard enough to protect it from something light falling on it. I wish it had pockets or a place to keep cables, but oh well, it's a good bargain and will protect my deck when I travel, and from my cats when I'm not at home. Fits the DDJ-FLX4 Also I used phone double-sided tape to help keep the foam up in the top portion of the case, that may not be the best thing to use but it's been working for 5 months so far.

If you don't have money to buy the big hard case, this one will work just fine for the SB3. Fits in nice and snug. Great materials inside keeps it safe. Also has a nice look to it. Overall, it is a great case for just the controller. Don't try to put anything else in there...just the controller :)

Good product

Product was good

DDJ FLX-4 perfect fit

Excelente

J'ai reçu la livraison 2 semaines avant la date prévue. De plus, je croyais qu'il s'agissait d'un sac rembourré, mais il s'agit d'un case rigide rembourrée. Donc c'est beaucoup plus rapide et meilleur que prévu. Je vous recommande fortement!

It's a good quality, the dimensions are as described by the seller. It helps protect my Hercules 300 Dj controller. Loved it !