Question 1

Can you hang a 3.5 lb item on the wall with 1 nail?

Accepted Answer

YES, but NOT with any nail and this assortment are too small mostly. use a 6D or 8D or LARGER nail such as a 16D nail used all over most houses framing for structural work,  Ideally you want to find a STUD behind sheetrock also. or use some sort of adhesive picture hanger, non-nail..... If you find a stud in the area you want to use and drive a 6D or higher nail, it will hold 20-40# and a 16 D about 50 or more #.  For one 3.5 # painting on a wire you can also probably run a 6-16D nail into ONLY sheetrock if nail at a 45 degree angle downward to better distribute forces in the softer drywall, as opposed to finding a stud. BOTTOM line: buy some BIGGER nails 3-4 or more and then experiment: nail in where want then apply your 5-10 # force with hand and verify that 4# is no problem, then forget about it, unless in CA where earethquake forces can dictate that you really NEED to nail into studs, to get 5-10 times the holding power as in only sheetrock.....

Question 2

I need 3/16"  wide head (nailhead) which is 4.76 mm. Which Amazon nail product has this dimension ? Thank you !

Accepted Answer

The width of the 1-1/2" nail head is about 0.2in(5mm)，and the width of the 1-3/4" nail head is about 0.2in(5mm). We also have many other sizes. The 4" nail head is about 0.35in(9mm) wide. The 3" nail head is about 0.27in(7mm) wide. The 2-1/2" nail head is about 0.27in(7mm) wide. The 2" nail head is about 0.25in(6mm) wide. The 1-1/4" nail head is about 0.15in(3.8mm) wide. The 1" nail head is about 0.15in(3.8mm) wide. The 3/4" nail head is about 0.12in(3mm) wide. The 5/8" nail head is about 0.12in(3mm) wide. The 1/2" nail head is about 0.12in(3mm) wide.

Question 3

I normally buy 19 x 1/2" size wire nails from the hardware store, would the 1/2" size of these be the correct comparable?

Accepted Answer

The length measurements of these nails are accurate.

Question 4

What gauge are these nails?

Accepted Answer

The diameter of 1in nail（flat head) is 1.6mm, which is about 16Ga.

ASIN	B08VW552CJ
ASIN	B08VW552CJ
Best Sellers Rank	#136,936 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #38 in Power Tool Collated Finish Nails
Brand	JEGONFRI
Color	silver
Compatible Groove Diameter	0.06 Inches
Customer Reviews	4.6 4.6 out of 5 stars (397)
Customer reviews	4.6 4.6 out of 5 stars (397)
Date First Available	20 March 2021
Fastener Type	Dual Head
Finish Types	Nickel Plating
Item Diameter	0.06 Inches
Item Dimensions	15.2 x 14 x 1.8 centimeters
Item Shape	Round
Item model number	WG-6626
Manufacturer	JEGONFRI
Manufacturer	JEGONFRI
Material Type	Carbon Steel
Model	WG-6626
Number Of Items	500
Number of Pieces	500
Outside Diameter	0.06 Inches
Part Number	WG-6626
Product Dimensions	15.24 x 13.97 x 1.78 cm; 209 g
Screw Head Style	flat
Size Name	1 in

Hardware Nails- Flat Nails

Details

Details

Description

Specifications

Common Questions