K-2006

QUICK SUMMARY: This is the exact and perfect kit to test your pool or spa water. It is accurate, easy to use, and will save you a TON of money because you won't have to blindly follow the advice of your neighborhood pool store. Highly recommended!! Background: We just had built a new backyard pool this summer. Initially, I took water samples every week to two (sometimes three) different pool stores that sell chemicals and equipment to pool owners. I quickly learned that water testing is half-art and half-science. I also learned that NOBODY will be as careful to perform water tests on your pool water than YOU. Finally, I learned that there is so much variation in testing methods -- leading to differing, often conflicting advice from the pool pro at the pool store -- that the best course of action is to just do everything yourself. It's easy to do, and it'll save you money, too. More background info: I mentioned above that I had my water tested by two (or three) pool companies. Using water samples taken at the same time and place in my pool, and having the water tested within the hour, these pool companies would give sometimes widely varying test results -- leading to sometimes conflicting advice. Example: Pool Co #1 said my free chlorine was 4 ppm, while Pool Co. #2 said my free chlorine was either near zero or super high, like around 10 ppm. Example #2: Pool Co. #1 said my Total Alkalinity was way too high; add acid! Pool Co. #2 said my alkalinity was a little low; add baking soda! Whom do I believe? This is why I test my own water now -- I *very carefully* measure everything, including the amount of water being tested, and the drops of the chemicals I add to the water. I'm not in a rush; I want accurate test results. What I LIKE: - It's easy to learn how to test your pool water for all the essential things: Free Chlorine, Combined Chlorine, pH, Total Alkalinity, Calcium Hardness and Cyanuric Acid (stablizer). Only the cyanuric acid test is a little tricky, but you can easily repeat that test over and over without using more test chemicals (more on that later). - There is a very helpful pamphlet included in this kit that explains a lot about water testing and sanitizing. It's pretty easy to read, too. - Using this kit lets you very precisely determine chlorine levels, including both free and combined chlorine, without having to do any color matching. In fact, there is no color matching for any of the tests except the pH test. What Could Be BETTER: - I wish the kit came with a larger supply of the chemicals you use the most: the powder and drops used with the chlorine test, and the red drops used for the pH test. These are the tests you'll want to perform daily. The other tests can be done between once a week and once a month. - The kit should point users to the Taylor website's videos which show how to perform the tests. Additional Advice: Using this kit, I'm taking a minimalist attitude towards pool chemicals. I don't shock the pool -- EVER -- unless combined chlorine is 1.0. That saves money on chlorine. I don't add clarifiers, phosphate removers, shocks, superchlorinators. I keep my pool water around 3-4ppm with high levels of stablizer so the chlorine doesn't get burned up in the sun. I do add algicide once a week as a precaution against algae. And I only add acid when pH rises to 7.8 or higher. Advice on Testing Procedure: Taylor (the manufacturer) says that to measure the liquid drops correctly, you must invert the bottle 180 degrees -- not 90, 120 or 150 degrees. Turn the bottle completely upside down and SLOWLY squeeze the bottle to form full drops that fall into your test water. If you turn the bottle horizontally (90 degree rotation), then squeeze, the drops you create are undersized and you don't get accurate results because you added too little test chemical into your water. I am shocked at how pool pros at pool stores and others who maintain public swimming pools use Taylor chemicals but don't follow Taylor's instruction on performing the test procedure! I've already disregarded the advice of the "pros" who have suggested that I add this chemical or that chemical to my pool. Using this Taylor kit, I am confident that I can continue keeping my pool water crystal clear and sparkling by spending 5 minutes a day doing chlorine and pH tests, and a few more minutes doing the other tests on Saturday morning. If I followed the advice of the "pros", I would've dumped acid into my pool when I didn't need to, or I would have shocked my pool even though there was no reason to do so. With knowledge comes power, and this Taylor kit gives me the knowledge I need to maintain my own pool water quality. Highly recommended!!! 9/6/2012 UPDATE: It's been a year now since I wrote the above review. I re-affirm everything I wrote. My water has been sparkly clear every day of the year, and I've only shocked the pool once, just before a big pool party with lots of kids. I only use algicide after a big rain, not once a week. I test my water every 2-3 days now. I still take water samples to the area pool stores every couple of months, but I trust my results before I trust theirs. One tip I didn't mention in my review: use only one scoop of the FAS-DPD powder, not two, if the water turns pink after adding just one scoop (it always turns pink for me after one scoop). Adding the extra scoop when the water is already pink doesn't improve or detract from the test you're performing, but it does waste the expensive powder unnecessarily. 12/20/2013 UPDATE: Wow! Thanks, Amazon-ers, for all the Helpful votes! :-) This summer, we dropped using algicide altogether, even after big rains. We keep our pool in the 3.0 to 4.0 free chlorine range, and that apparently has kept algae and pink slime away without adding any other chemicals to our pool. I probably saved $50-$100 this year not using algicide. If I am worried about water clarity after a party or big rain, I add 1.5 gallons of unscented, plain Clorox (which is just diluted form of pool store liquid chlorine). The pool was spotless, crystal clear and enjoyable all year long. I also don't test the water every day, either; instead, I test the water 2-3 times a week. Because the water condition is held constant for so long, and because I know my pool and pool water so well, testing more frequently than this is unnecessary. If you're just starting out, test every day until you really understand your pool and how to balance your water. Then, back-off testing it daily but not less than 2-3x per week. I can't believe how easy it is to maintain crystal clear water. Note that I added the extra advice, above, on the test procedure to use, since it's important to not only use good quality test chemicals, but also to follow a correct test procedure, too. 01/22/2017 UPDATE: I don't have a salt test kit, and my salt water chlorine generator's salt reading was reading high (it does that when the water temp drops). So, I went to three pool stores to have my pool water tested (two of them Pinch-a-Penny stores, one a local pool store). Below are the results from the three stores. Salt reading? 3000 or 3300 or 3750 Chlorine level? 1.5 or 4.0 or 4.0 (I got 5.5 from my own testing) pH? 7.3, 7.6, 7.4 (I got 7.2; I added acid an hour earlier) Alkalinity? 80 or 85 or 120 (I tested 85 after adding a little baking soda when it was 80) Calcium hardness? 270 or 330 or 290 (I got 380) Stabilizer? 25 or 80 or 60 (it's 60, and has been for months) I watched one guy (who didn't test my water) shake drops out (NO! gently squeeze them out). Another squeezed drops holding the bottle horizontally (NO! hold the bottle completely upside down). The imprecision of these pool stores in their testing process is observable if you know what to look for. The kicker? My chlorine has been high because the water cooled. The Pinch-a-Penny that told me my chlorine was only 1.5 said I should I use the Boost button to increase my chlorine. NO!! Never, NEVER trust a pool store to test your pool water. (I'm going to buy my own Taylor salt test kit now....)

Last year we replaced our spa and at the same time we switched from bromine to chlorine based on the dealers recommendation. I decided to put more effort into fully understanding water chemistry because in the past we've had problems with itchy skin and cloudy water and I wanted to avoid that. This test kit has been an essential part of continuously having a spa with crystal clear water and no irritation. The testing is intimidating at first, but within a few days the testing becomes routine and you don't have to recheck the instructions. I actually look forward to doing the tests. The booklet that comes with the kit is an incredible teaching aid. Just digest it a little at a time because it can be a bit much all at once. There is no guesswork. I know exactly how much chemical to use based on the test readings. I now have my bottles marked with how much to use based on how far I need to move the needle. I never overshoot when adding chemicals. Highly recommend if you want consistently clean water. For reference I use granulated chlorine with non-chlorine shock.

I’ll be the first to admit it – I’ve been using dip sticks for far too long, and it’s been a frustrating experience. But the TAYLOR TECHNOLOGIES INC K-2006 TEST KIT has completely transformed my approach to pool maintenance, and I’m kicking myself for not making the switch sooner. This kit is an absolute game changer. It provides accurate and reliable results, which is crucial for maintaining a safe and sparkling clean swimming pool. The FAS-DPD method for measuring chlorine levels is a revelation compared to those finicky dip sticks. What I love most about this kit is its precision and ease of use. It’s straightforward to follow the instructions, and the color-matching system is simple and foolproof. No more guesswork, no more frustration. I can confidently say that this kit has improved the quality of my pool water, and it gives me peace of mind knowing that I’m using a professional-grade tool. It’s an investment that pays off in the long run, both in terms of time saved and the health of your pool. In conclusion, if you’re still using dip sticks like I was, it’s time to upgrade to the TAYLOR TECHNOLOGIES INC K-2006 TEST KIT. Don’t be like me and wait too long to make the switch. This kit changes everything and makes pool maintenance a breeze. Highly recommended! ⭐⭐⭐⭐⭐🏊‍♂️🔬

Accurate, Professional-Grade Testing for Crystal-Clear Water The Taylor Pool Water Test Kit is the gold standard for anyone serious about maintaining their pool or spa. I’ve used cheaper strip-style tests before, but once you try this drop-based kit, there’s no comparison. It’s incredibly precise, consistent, and gives you professional-level control over your water chemistry without relying on a pool store. The kit measures everything that matters—free and combined chlorine, pH, alkalinity, calcium hardness, and cyanuric acid (stabilizer). The included instructions are detailed yet easy to follow once you get the hang of it. Each reagent bottle is clearly labeled, and the color changes are sharp enough to read confidently even in daylight. I especially appreciate the acid/base demand feature—it tells you exactly how much acid or soda ash to add to rebalance your water, which takes out all the guesswork. It comes in a sturdy plastic case with compartments that keep everything organized and secure. The reagents last quite a while if you test weekly, though I’d recommend the larger “C” version (K-2006C) if you maintain a big pool or hot tub since you’ll go through the chlorine reagent quickly. There is a small learning curve at first, but after a few uses, you’ll get fast and accurate results in minutes. Once I started testing my own water with this kit, I stopped bringing samples to pool stores—my readings are just as good, and I save time and money. Bottom line: A must-have for pool or hot tub owners who want accuracy, control, and peace of mind. The Taylor kit pays for itself by preventing chemical mistakes and keeping your water perfectly balanced year-round.

There are similar test kits out there, I cannot speak for those. I got a 7500 gallon above ground pool hearing my whole life how much of a nightmare they are and how expensive the chemicals are. I didn't care, I wanted a pool. I also got test strips, they were not nearly good enough. This pool is round, 18ft diameter and 52" deep. The volume of your pool directly reflects how much your chemicals will cost. I'll kind of break that down as well in this review. Keep in mind, my pool is only 7500 gallons. I ordered this. It allows you to do a bunch of tests and comes with a nice guidebook on what it all means. It's a lot but if you read the little book it's very interesting and gives you an actual understanding of some of the many things happening in your water. The bottle sizes are small and you can only test for CYA a handful of times (you shouldn't need more than this kit for a solid summer of learning) and some of the tests you only need to do once or twice a season, so those bottles will last a long time. For the tests that require frequent testing, which changes depending on your water source, there is quite a bit here. I have very high alkalinity in my water, so there was a lot of alkaline and PH tests I had to do before I got that in check. My hardness was alright, and PH will move around a bit since chemicals aren't neutral, but for me my PH tends to go up, so a couple bottles of muriatic acid lasts the entire year, easily. I'll review the product first. I love this thing. There's 2 sizes so it's recommended to get the one with the larger size bottles. I got the smaller one and honestly it's enough. As I said, most of the tests aren't even monthly tests, and even the larger size bottles are still pretty small for the regular tests. You can purchase a 16oz bottle of R-0871 and a half pound of R-0870 powder for less than the cost of this entire kit, and you'll be able to test chlorine every day of the year 20 times if you want. So i recommend getting this kit, learning the chemistry, then just buying large bottles from Taylor of the refills you use often. This is a perfect starting point though and it will save you money. Most of the tests are very simple once you get the hang of it. Get a water sample, put in a few drops of a certain bottle, put in drops from another bottle, reference a sheet, add what it says. A few have an extra step and a few have even less steps. Once you learn it, you can pop out a chlorine test in a minute. I pretty much end up putting a red solo cup (2 cups) of 10% liquid chlorine in the pool a day now that the pool is balanced, and every 2 weeks I need to add a cup of muriatic acid. Of course you need to balance everything first and get your CYA levels right, but if you read the booklet you'll understand all that in no time. Cost: So I spent the summer learning and trying to figure out the ins and outs so I did a few experiments so I probably used more chemicals than I had to overall just to get the hang of it, but here's what I spent. I spent about 20 dollars in muriatic acid, bought a massive bottle of pool conditioner(cya) for like 30 bucks that should last years, a box of shock powder packets for 30 bucks, and about a gallon of 10% liquid chlorine a week. sometimes more, sometimes less. Those gallon jugs are 6 bucks each approx. Overall, now that it's balanced, on average for a 7500 gallon pool, I don't spend more than 10 bucks a week. The odd time I go on vacation and the water gets a little out of control, I just shut off the pump, let it settle, and vacuum it out to waste a few times then dump in a packet of shock powder and turn the pump back on and clean everything a couple more times and it's crystal clear again. I'm about to now purchase larger sizes of the chemicals to check chlorine levels and I should be good to go for years.

Taylor Technologies products are my go-to for stability and reliability. I have several test kits to keep my pool balance myself. Saves me from traveling to the pool store so often. I take a water sample in the beginning of the season; after that I can rely on my at- home testing reagents and kits. I might have to go to the pool store mid season (maybe not), and then right before closing I might, just to confirm my chemistry is good. This year I opened up Crystal Clear.

Purchased the Taylor K-2006 Test Kit for a saltwater spa with chlorine sanitizer electrode. This review is relevant for Spa water but not pool water. I gave the Taylor K-2006 Test Kit a 1-star review because the test results were not accurate for pH or free chlorine. Freshly balanced water (additions included alkalinity increaser, pH decreaser, Spa salt, Silk Balance; chlorine electrode off) was tested using the Taylor K-2006 Test Kit and compared to test dip-strips and a Spa Dealership test instrument. Results were: * K-2006 Kit: free chlorine =33, alkalinity =125, pH >8.0, hardness =20 * Spa Dealership: free chlorine =0, alkalinity =120, pH =7.2, hardness =25 * Dip-strips: free chlorine =0, alkalinity =130, pH =7.2, hardness =25 It appears that one or more of the additions used to balance the water causes and interference with the Taylor K-2006 Test Kit. Test results for the source water before any additions were: * K-2006 Kit: free chlorine =0.1, alkalinity =80, pH >8.0, hardness =90 * Spa Dealership: free chlorine =0.2, alkalinity =80, pH =8.2, hardness =93 * Dip-strips: free chlorine =0.5, alkalinity =85, pH =7.8, hardness =80 I contacted Taylor with my concerns that there may be an interference with their test kit. Initially Taylor indicated that they were not aware of any chemical interferences and were very helpful in helping me try to identify the problem. However, Taylor became uncooperative indicating that they stood 100% behind their test kits and that 1) I was probably doing the tests incorrectly, 2) that test strips are highly inaccurate, and 3) that the Spa Dealership instrument was probably not calibrated. For the record I was a trained and certified water chemist that conducted these tests in the laboratory for years. While Taylor is correct that test strips may be inaccurate it is unlikely that a Spa Dealership would jeopardize their business by not properly calibrating their test instrument.

As a DIY-er when I moved into my new home with a pool I decided to learn all about pool chemistry and manage it myself instead of paying someone. This Taylor kit is perfect for getting accurate reading of critical chemical levels. (Note this does not test for salt; if you have a salt water pool then you will probably want the add-on for measuring salt). If you're new to testing your pool this kit comes with everything you need to measure Free/Combined Chlorine, pH, TA, CH, and CYA (Cyanuric Acid). These are the 5 critical things that determine the sanitation of your pool, and overall water balance which - if not correct - can cause issues with your lining, plaster, plumbing and other equipment like heaters. It comes with an explanation of these, how to adjust them and tables to determine how much chemical to add to correct the issue. I have found their numbers to be spot-on for correcting levels. So my typical day starts with measuring Free and Combined chlorine as well as pH. Roughly once a week I check TA, CH and CYA. If you're new to this do some research on what these levels mean and your options for correcting them. For instance if your chlorine level is low you can raise it with chlorine tablets (in the skimmer or erosion feeder) or you could add sodium hypochlorite directly to the pool. Both will raise the chlorine level however there's a HUGE difference between the two: the tablets will raise you CYA level which if too high renders your chlorine useless; the sodium hypo will not affect your CYA however it will raise your pH! Yes pool companies will test your water for free (and then tell you what chemicals to buy) but did you know people have reported wildly inaccurate results from their pool companies. I know someone who sent their water to 3 stores and got 3 wildly different readings back. He had a 66% chance of making the problem worse by following their results/advice. Lesson - test it yourself. If your pool water is anything but crystal clear (algae, milky, slimy walls, etc.) get this kit and figure out why. Side note: Consider the Taylor 9265 Magnetic Stirrer if you're going to do a lot of testing!

Très bon produit

This testing kit is much better than anything available at our pool store. Our chemical use has plummeted now that we can get accurate test results and our water has never looked better.

Invaluable if you want consistent clear water. Easy to use but will take 10min to test the water . I only use this once a fortnight test strips are good enough in between

Algo caro , pero funciona muy bien, es mi segunda temporada con e . Al principio hay que ir fijándose mucho en todo y parece complejo , pero una vez te habitúas es maravilloso y muy preciso. Mi agua está perfecta , eso sí vais a medir mucho el cloro puede que se os acaben pronto los reactivos Todo está en inglés , pero las instrucciones son claras

Good kit. Very expensive.