Wall Mount Bracket Junction Box

Solid metal bracket, fitted the camera perfectly and had enough room for all the cables and waterproof Rj45 connection gland to be stashed out of the way so I just needed to run the Cat 6 cable I used through the wall. Note: due to the design of the mounting bracket I could only use 3 of the 4 screw fixings (it fits very solidly like this) and I did have to cut a small piece out of the metal where the round hole is to allow the cables to run though and stash behind it easily. This wasn't hard with a 12v multitool but would be awkward (but probably not impossible) with a hacksaw.

Bought two of the wall mounts to hold my Reolink cameras. Excellent quality and enough space to hold the additional camera cables in the frame. Easy to install and looks good.

I bought two of these mounts to use with some Reolink 520A cameras and they fit really well. The mounting plate is a little tricky to fit as the cable is incredibly snug when passed through the supplied slot. This makes tightening the bolts on the camera plate to the mount difficult; widening the slot a little as suggested in another review would probably help, but it wasn't 100% necessary with a little muscle! The wall anchors don't work that well in brick, but perhaps they're only intended for use in concrete? Either way I'm very happy with these for the price and would definitely buy them again in the future.

An almost perfect product. This is an excellent quality, well made, sturdy mounting bracket for CCTV Dome Cameras. It's a perfect size for our ANNKEVISION Camera, allowing for a very neat appearance. After attaching the bracket to the wall using the included screws, I was able to hang from it without bending/breaking or pulling off the wall (I weigh around 80kg). Inside the arm, there's a space to feed the cables through BUT at its narrowest point (where it joins to the circular head) it has a very uneven shape with wavy edges which made it too narrow for the weatherproof LAN connector to fit through. After a few minutes to grind out the wavy edges with a Dremmel I was able to get the large connector through. The backplate is nice and solid with a decent size channel for cables, but I'm slightly disappointed that they've only provided a hole on the bottom edge for cable entry. In my case I needed the cable to come out of the top, so that it could be hidden - to make this possible I decided to drill a small channel into the wall where the edge of the backplate made contact (rather than grinding a hole in the backplate). The mounting plate has a good variety of slots to suit various cameras and comes with screws, washers and nuts. Once the camera is securely attached, there's 3 screws to attach the mounting plate to the head of the bracket, which was a bit of a tight fit, needing perfect alignment. Fortunately there were 4 screws in the pack even though it only needs 3, because 1 of the screws had a head with no grooves for a screwdriver. All in all, it took about 1 hour to put up, including the extra time to modify the cable hole and to secure the cable out of sight. Definitely worth the money. Easy enough to install.

Very expensive but I guess for the sturdiness and quality it is worth it. I purchase this for my eufy camera in order to get a full range of motion 360 degree length

a well made useable product. Annoyingly I Had to cut a hole in backing plate to fit the reolink cameras stilupidly thick cables.

Easy to fit, decent cable access and fits a wide variety of cameras with a combination of slots and screw holes. Fits a reolink RLC520 poe camera and cheaper than the reolink camera bases. Would definitely buy again if we fit another wall camera.

Brilliant Arrived on time and it did the job we needed it too.

Guter Halter für Reolink Kamera mit geschütztem Kabel

Lo montamos con unas cámaras Domo Uniview se adaptaron perfectas a lo soportes. Recomendable.

Fast easy assembly, economic purchase. Easy mount. Rock solid and well built. I bought 8 of them.

Che è perfetto e consono alle descrizioni su Amazon ; per la qualità del materiale bisognerà aspettare qualche anno

Se monte facilement, livré avec pas mal de visserie. Penser à mettre du silicone blanc pour l’étanchéité ainsi que pour la finition entre votre objet à fixer et le support.