4K for Porsche

I installed the FitcamX 4K Dash Cam in my 2022 Porsche Taycan 4S, and the experience was excellent from start to finish. Installation was quick and straightforward, and the design integrates perfectly with the vehicle’s interior. Once installed, it is completely discreet—I genuinely cannot tell it is there. It looks factory-installed, which is exactly what you want in a car like the Taycan. The video quality is very clear and performs reliably in both daytime and nighttime driving. For the price, this dash cam does a great job and delivers strong value without compromising on quality or aesthetics. It provides peace of mind while maintaining the clean, premium look of the car. I would confidently recommend this product to any Taycan owner looking for a well-designed, easy-to-install dash cam solution.

This dashcam exceeded my expectations. It is stealth (you don't know it is there), clean looking, no wires shown, OEM like, and has a cellphone app to download video/picture. The installation is not easy, but not too difficult if you know what you doing, since you don't want to damage any pieces removed, so do take your time for it. The instruction video included is adequate, but needs a few more details, especially where to use the pry tool to remove these overhead plastic covers. 1. To remove front large cover next to reading light is easy, just pry and push forward (towards windshield). 2. To remove the smaller cover for rain censor is also relatively easy, just pry the mid section (with securing tab), it will pop loose. 3. To remove the mirror from its base is hard, you need to use some force, CCW twist the mirror very hard to dislodge it. 4. To remove the mirror back cover is easy, once the mirror is dislodged from its base, just slightly expand two side's plastic cover it will pop out. 5. Locate the 3 pin wire connector (power supply) and pull it out from the base connector. 6. Connect dashcam's female connector with this 3pin connector (power supply), and then connect the 3pin connector (male) from the dashcam to the base connector (supply power to rain censor). 7. Replace the OEM mirror back cover with the dashcam (integrated with the mirror back cover) and attach/click the dashcam to the mirror. 8. Re-attach the mirror with the dashcam back cover to the rain censor base, CW twist it on, just hand tight is enough. 9. Test the dashcam to ensure you have power before re-attach the small cover and the large cover with reversed removal steps above, and you are DONE. This is a great product design idea. It integrates dashcam with the rain sensor/rear view mirror back cover, so that no wires dangling around, very OEM look. It has good video quality, easy to download video clips, either with an app via Wifi connection, or just pop out micro SD card and insert it into provided USB C card reader, very convenient. It does take some time to install, but it is well worth, as you get a clean OEM look dashcam and stealth. A well earned 5-star product.

n the quest for the perfect dash cam, the Fitcamx 4K Dash Cam for Porsche Macan hits many of the right notes. It’s a near-perfect symphony of easy installation and a flawless fit, designed specifically for the sleek contours of your Macan. Let’s start with the standout feature: installation. This dash cam slides into place with the grace of a seasoned valet parking your car. No fuss, no extra tools—just a perfect fit that integrates seamlessly with your vehicle’s interior. It’s almost as if Porsche themselves crafted this little marvel. Now, onto the visuals. The video quality, while commendable, leaves a bit to be desired. It’s 4K, yes, but not the kind of 4K that makes you question if you’re seeing the world with new eyes. It captures the road adequately, but there’s a lingering sense that it could be crisper, sharper, more vivid. Despite this, the Fitcamx 4K Dash Cam holds its ground. It’s reliable, easy to use, and doesn’t detract from the sophisticated ambiance of your Porsche. If you’re looking for a dash cam that blends in and gets the job done with minimal hassle, this is a solid choice. TL;DR: Fitcamx 4K Dash Cam for Porsche Macan: A flawlessly fitting, easy-to-install dash cam with good video quality that could be a touch sharper.

Fits great on my 2024 Macan. Can’t even tell it’s there. Took me and my husband about 30-40 minutes to install. The majority of that time was being extremely cautious in removing the light console and watching videos to make sure we did it just right. The camera is plug and play and once we tucked in the wires, it was very easy to put everything back together. Camera works great, video looks really good. App was easy to setup. The OEM look of the camera makes it worth the cost.

Was kind of difficult to hook up, but looks great and is user friendly. Picture quality is good, not great. Overall I like it, especially the flush, stock look. Update- I'm dropping this to one star. I needed an incident that occurred in front of me. The camera recorded before and after the incident, but not what I needed. There was a 40 second gap between videos. Defeats the purpose if it may or may not be recording when you need it!

Another 2023 Cayenne reviewer said it doesn't work because you need specialized tools, which is not true. The plastic prying tool that comes in the box gets the panels off and I used a tiny flathead to pop the clip that holds that midsection panel in place. Same clip type is used to secure the red ribbon on the first panel. There is a detailed review on here with the blue and red circled photos that significantly helped. Watch a few videos to see from different angles. I am a mechanically inept female and I was able to install and button up within an hour. With some trial and error, a big tip is to attach the camera cable so it's on the outer right side of the wires. This will allow for the 2nd panel to fit back on. Overall, it looks great and the app is easy to use. As stated in the guide, turn off bluetooth and cellular data when trying to initially connect your phone to the camera's wifi.

I LOVE this camera! I was looking for a neater way to install my Vantrue which had a cable that hung down, and I didn't want that. Then I came across this camera and I loved the way it looked, and it seemed very easy to install. Full disclosure, I have rebuilt many a car, so I was more familiar with how to install things. I watched their installation video several times, and had my phone out there in the car. Everything was going fine, except the first plastic panel would not release as shown. So of course it broke! I could have fixed it with some CA glue and fiberglass cloth, but it being a new Porsche, I wanted it perfect inside and out, so, $38.00 and two days later, I had the new bezel. It really didn't cost me anything because the staff at Arlington Porsche gave me some really nice swag. A mug, keychain and a book. So I actually came out ahead! I could not find the plug they were referring to, so I emailed them, and they were very prompt in their reply, and told me where to look. Once I found the plug, it went in right away. Powerup and setup went as shown in the instructions. I linked it to my Android S24 Ultra no problems and setup the features I wanted. Video quality is OUTSTANDING! I got the front only camera, as I didn't want to deal with running that cable. Maybe one day they will have a BT camera? Thanks again for the help!

The five stars is really for the super responsiveness of the support staff. I had trouble installing it over Thanksgiving break and support responded to my initial inquiry within hours. From there, we went back and forth a few times. Their follow-up responses never took more than an hour or two. I had two of their staff (they are named w/in Zendesk) reviewing all photos I sent over in detail. Ultimately they couldn't really help me out but their responses led me to reinstall the OEM cover which helped me figure out how to install the FitCamX. For anyone else struggling with the installation, when you push the camera up onto the mirror base, no matter how much force you use, it might NOT click into place like some of the other videos show. If this happens to you, simply pry the two ends / wings away from each other as you push up and you'll be able to get it to click into place. I struggled mightily w/ this install, taking almost 8 hours over several days. The biggest issue was getting it to click into place per my comment and workaround in the paragraph above. I installed two other FitCamX cameras in the past, one on the RX350h and the other on a GX550. Those installs never took more than 20 minutes. Anyway, throwing a shoutout to their ultra responsive customer support staff. I just hope I don't have to reinstall this camera any time soon. The harness on my first FitCamX on the RX350h crapped out right after the warranty period so I had to purchase another harness, at least the reinstall there was relatively quick.

installata oggi, testata e pare funzioni correttamente

We have had dash cams in all our cars for some time. Most have a really untidy after market look about them and some of them are loaded with too many features, which you pay a lot extra for. We just wanted one that could provide evidence in the event of an accident. This is as neat as you can get as it fits in the housing that contains the rain sensor behind the rear view mirror. This is fitted to our Porsche 911 / 992 and looks much neater than the "official" Porsche dashcam we have in our Panamera. I did pay to have it professionally fitted and I do recommend ordering the polarising lens with it. The auto electrician who fitted it told me he was also fitting a lot of these to Audis as they use the same rain sensor housing and, like Porsche, charge the earth for their own label dash cam.

Efter tagit bort allt så visade det sig vara fel kontakt :(

Super Dashcam, einfache Montage, gute Bildqualität. Fällt kaum auf, sieht aus wie OEM. Auch schneller Support bei Frage. Gerne wieder +++

Good quality of video, easy to install, I'm offer only 4 stars because in my opinion it is a bit expensive.