P10 FLUX

The stand-out thing on this model is the dust filtering. I've bought several other brands, some of which force you to pay extra to buy an accessory dust filter kit, none of which are as fine in terms of particle filtering or fit as well or clean as easily as the front filter on this unit. The front dust filter is just about the finest without being incredibly restrictive of air-flow that one can get and in my dusty home that's pretty useful. It also simply slides out and can be rinsed or wiped down. The sound dampening is also pretty good, the isolation of hard drive noises from multiple spinning disk magnetic drives, including enterprise drives is also quite good, probably not as good as be-quiet with their specialized isolation caddies but it's a lot cheaper. The hard drive caddies themselves are plastic, not too impressively built, kind of cheap but they work, don't transfer vibrations that badly so I can't complain that much, certainly not for anything in the sub $150 range as far as cases go. Airflow is good, for a media server build the fact that the hard drives are located in the front directly in the path of airflow is great because I want to keep them above all else cool so they last longer. It is a rather simple design, most PC's I've built for gaming have either top and/or bottom fan mounting options but this is a simple straight-through. The default fans after nearly a year of constant use aren't suffering any whine or annoying noises, if they do fail I'll just replace them with some Noctuas. The front 3 fans at least aren't PWM (back one is), so you can't control them with software or the motherboard with temperature targets, instead they're controlled with a switch on top which has high, low, and off settings. On high they're noticeable in quiet scenes when a movie is playing on my nearby TV but on low they're not really noticeable and wouldn't bother most people trying to sleep in the same room as them as long as you're at least 8 feet away. Lack of PWM on default case fans on a budget case is to be expected, par for the course. If you want that buy aftermarket. Noise level could probably be lowered a bit from these or I could increase the air movement without raising noise level if I replaced them with Noctuas but once again the noise isn't annoying on low with no other sounds around. If I wanted to really run them at full speed all the time I'd definitely replace for the sake of my movie-watching experience them but a lot of people could probably tolerate even that. Cable-management is fine, there's plenty of room for routing things neatly and cleanly and building was not a struggle. One potential annoyance for some people may be the glowing white lights around the USB ports at the top of the case. I could certainly do without it but it's not so annoying that I've sought to try and disable it, suppose one could take nail polish or similar and carefully paint over the lights with it. The hard drive access light at the top blinks like crazy for a media server build like mine so I ended up covering it up with a piece of black electrical tape. Not sure why those types of lights still exist or can't at least be disabled in UEFI/BIOS.

When it comes to building a PC, choosing the right case is crucial for both aesthetics and functionality. Enter the Antec Performance Series P7 Neo Mid-Tower E-ATX Silent Case - a sleek and feature-rich chassis that strikes the perfect balance between style, silence, and performance. Here's why the P7 Neo deserves a spot in your next build. Let's start with design. The P7 Neo boasts a minimalist yet elegant aesthetic, with clean lines and a sleek profile that looks right at home in any setup. The tempered glass side panel showcases your components in all their glory, while the understated front panel design adds a touch of sophistication to your build. But the P7 Neo isn't just a pretty face; it's also designed with performance in mind. The spacious interior accommodates E-ATX motherboards and high-end graphics cards, giving you plenty of room to build the system of your dreams. Plus, with support for up to three 120mm fans, including two pre-installed in the front, airflow is optimized for maximum cooling performance. One of the standout features of the P7 Neo is its emphasis on silence. Thanks to sound-dampening materials and a thoughtfully designed airflow system, this case keeps noise levels to a minimum even under heavy load. Whether you're gaming late into the night or working on intensive projects, you can enjoy a quiet and distraction-free environment without compromising on performance. Another highlight of the P7 Neo is its versatility. With support for up to five 3.5" HDDs or six 2.5" SSDs, as well as a 5.25" ODD bay, storage options are plentiful. Cable management is a breeze thanks to the ample space behind the motherboard tray and strategically placed cable routing holes, ensuring a clean and clutter-free interior. Installation is a breeze thanks to the tool-less design and thoughtful layout. Whether you're a seasoned builder or a first-time PC enthusiast, you'll appreciate the ease of installation and the attention to detail that Antec has put into every aspect of the P7 Neo. In conclusion, the Antec Performance Series P7 Neo Mid-Tower E-ATX Silent Case is a standout choice for anyone looking to build a high-performance PC without sacrificing style or silence. With its sleek design, excellent airflow, and emphasis on noise reduction, this case ticks all the boxes for discerning builders. Upgrade your build with the P7 Neo and experience the perfect blend of form and function.

My current PC case is a fractal design r5 and i bought this to use as a unRAID server build. This case is like if you described a fractal design r5 to your buddy on the phone and they came up with a pretty good rendition of it themselves. I missed a few of the r5 niceties like captive screws and the latch for the side panel and the modu-vent system of the fractal design series cases, but for the price compared to the fractal cases this thing holds up. Really solid, honestly might have even thicker noise reduction padding on the side panels than the r5. HDD mounting is pretty nice tool-less for my x5 4TB 3.5in drives but is a little less premium feeling being plastic compared to the fractal case. The case coming with 4 fans is a huge plus, all are very quiet but move a good amount of air for their size at the lowest setting. The filters front and bottom are also reminiscent of the r5 and its just as good here. Cable management up the back is a little thin but the inclusion of the PSU shroud makes it much easier to hide the mess of the non modular PSU i bought. Velcro straps included were a big plus but I would like to see more little tabs and things to add more cable management zip ties\velcro to for the fan controller cables which were a little too short for proper cable management, even after pulling it all apart to get it to lay down as neatly as possible. Included 3 way fan control switch on the front panel is a nice touch ala fractal again and isn't obscured by the swinging front door either. Overall great case, is basically a fractal design r5 for what an r5 went for pre covid!

Per chi cerca un case che possa garantire robustezza, alta possibilità di storage e uno slot da 5,25" per masterizzatori, cosa ormai rara. Il case ha la possibilità di montare contemporaneamente 8 HD da 3,5" e 2 da 2,5", quindi una manna per chi desidera ospitarci molti dischi. Oltretutto i cestelli degli HD, in metallo, sono modulari e si possono spostare o togliere a seconda del bisogno. Pratico lo sportello anteriore con il filtro aria e l'unità da 5,25" in alto. Non è un case con tanti fronzoli e lucine varie, quindi non adatto a chi cerca trasparenze e luci rgb. Unica mancanza è la possibilità di montare dissipatori a liquido o semplici ventole sul tetto del case, è semplicemente chiuso e non è previsto purtroppo. Sono presenti comunque 3 ventole frontali e una grande posteriore.

大きいとは思ったが届いた瞬間結構ビックリしました！ 買い換え前はもっと大きいケースだったので問題ありませんでした。 やっぱり大きいと中での作業がしやすく熱もこもりにくいのでGood 風量のスイッチも付いているので状況によって切り替え可能。

Gostei bastante da caixa pois permite colocar 8 discos de 3.5" polegadas e ainda 2 discos de 2.5" polegadas ou SSD. Para além disso tem uma baia de 5.25" que permite colocar opcionalmente mais 1 disco HDD de 3.5" polegadas e fazendo assim um total de 9 discos HDD de 3.5". Funciona bem como um sistema NAS com bastante espaço de armazenamento e silencioso. Estou a gostar e instalei True NAs como software.

Nice case I have had it for a number of years now. It has a front panel besides the swing open door on it so it catches any dust that the computer fans might be bringing in.

漆黒の墓石もかくやとばかりの武骨で渋すぎるデザイン。 なんでもかんでも光らせてゲーミングなんたらと称するばかりが能じゃないとばかりに前時代的な異彩を放つデザインである。 現在では主流なケース上部の通気孔にダストフィルタというものがなく側面下部にメッシュの通気孔、ケース下部にも通気孔はあるものの小さく、フロントに12㎝×3という吸気に比して排気がリアファン一個のみというのは少しアンバランス感が否めない。 とはいえ静穏性と冷却性を高い次元で両立させているのに一万ちょいで買えるというコスパの良さは◎。 注意点としては初期から付属してるファンコンは基本的に弱運用がいい。 なぜなら強にしても誤差レベルしか冷えないうえに静穏性は露骨に失われるからだ。 あとケース下部の逆刃ファンだが私が購入したロットではすでに取り付けられていたが、配線時にフロントケーブル類をマザボのピンに刺す時に干渉して外さねばならずあまりの面倒くささに発狂しそうになった。マザボのピンの位置にもよるだろうが組み立てる際にはいの一番に逆刃ファンを一旦パージしたほうがよさそうだ。 裏配線自体はとてもやりやすく初心者にもやさしい部類のケースではあるが逆刃ファン取り付け済みだけは大きなお世話だった。 光らせるのは嫌い、シンプルイズベストな主義の方にはおすすめできる墓石ちゃんですよ。