Sewer Jetter Kit 50FT

Took a chance on this a couple years ago when I had a drain pipe outside that was getting plugged up. Since that time, I have used it quite a few times on main drain lines and septic pipes. It has been awesome - Absolute lifesaver! Basically self-feeds, blasts through typical clogs. Has been a great purchase and it has saved me thousands of dollars vs calling a plumbing company. I use it with an 11hp pressure washer, IIRC it is about 3600psi/4 gpm.

This actually worked really well. Didnt fix our problem, but we think our drain may be crushed or collapsed. Theres no way anything can clear it. But this made it all the way through our other drains. Very easy to use. Connected it to our cheap pressure washer and it worked perfectly. We are keeping this for any future drain problems. Great tool for the price.

I’m a professional maintenance person that unfortunately deals with a lot of blocked sewer drain lines. The main tools I use to clear the lines are inflatable bladders or power snakes, but occasionally they don’t work and I have to resort to using a 3400 psi pressure washer with this jetting hose. The hose is tightly wound for shipping and has to be carefully uncoiled in a relatively warm area before using, you want the hose laid out as straight as possible before you start inserting it into the line, this is not a heavy duty item and should be handled carefully as to avoid putting any kinks in the hose. You can not push this through toilets or any drains with tight bends but I would say it will work anywhere a 1/2” diameter snake will go. Push some of the hose into the drain and then start your pressure washer, the pressure will start pulling the hose into the pipe, you can lightly keep pushing the hose to help it move through the pipe, when you reach the blockage you will feel the hose stop, pull it back a little and keep letting it bump up against the blockage, it could take a few minutes to cut through the blockage. If I handle these gently I can get about 6 months use out of one, after that the outer black case starts cracking and I toss it in the trash and order a new one. For the price I think they are worth it.

This is the third sewer jetter I purchased and used in drilling me a deep well. The two previous jetter I used which were both rated at 4200 psi and my pressure washer is only rated 3800 psi but did not last long. They developed pin sized leak and not serviceable anymore. The latter it made it through the completion of my project without any high pressure leak.

6 inch sewage drain, 135 foot, this was a slow drain issue not completely plugged. Got the sewer jetter today, everything needed besides the pressure washer was included. I am using a 3200 psi pressure washer. Hose looked like good quality and end fittings looked good, worked good, and held up to a beating. Started working the hose into the pipe. The hose is not made the be pushed on. Pulled the trigger on pressure washer and the nozzle started pulling the hose into the drain. I started with the front spray and two rear spray nozzle. About 50 feet in hit some blockage, slowly pulled the hose out a foot let it take it back in a foot a few times and we made it past the first blockage. Continued down the pipe, came across second blockage at about 75 feet, repeated moving it back and forth, no luck. Pulled hose, changed nozzle to the on that has one front spray three rear spray. Back at 75 foot mark and a few minutes later working down further in the pipe second blockage cleared. About 125 feet in hit another blockage worked it for about 10 minutes, nothing, couldn't get through. Time for the third nozzle, the spinning one. Let me tell you when I pulled the trigger on this one you could hear it working. It was like a plane taking off, spinning very fast. This one pulled the hose into the pipe much faster then the other two. Back at the 125 foot mark 2 - 3 minutes later was past the blockage. Sewage line completely cleared at this point no back up at all. Went a little further and I think I was in the city sewer. Now comes a problem, when I started pulling it back out it was stuck I moved it around turned water on and off nothing. It's not coming out. Pulling much harder on the line then I should be working it back and forth for 20 minutes, nothing, its not coming out. Took a break and put a garden hose in the sewer pipe to run water through it to clean out anything left over. Came back 10 minutes later and said ok let's get this sewer jetter out of the sewer pipe. Pulled it one time and it came right out???? Idk if it was the water from the garden hose running down there or what happened but a sigh of relief. Worked the sewer jetter back and forth through the pipe 5 - 6 times and called it a completed job. All and all I would recommend this product, much better then having to spend $450 to have someone snake my line. Now I have the tool to fix it if it ever happens again.

The hose is really good and some of the nozzles work great but some of the nozzles it's like they forgot to drill the holes and one even has a hole where it shouldn't. Overall for around 60 it's not bad.

Save yourself calling an expensive plumber! If you have access to a pressure washer you can do the job yourself! I used a Honda with a 3000 PSI. After reading a couple of bad reviews about the hose splitting, I found the hose to be of good quality. First tip on that is, I was careful not to leave kinks in the hose. I hooked up one end to the spray nozzle of the pressure washer, and then I went to the opposite end and kept spinning the kinks out. I could not believe my eyes at the way that hose laid so flat and straight after that! I had an 80 foot stretch of sewer pipe that had not been cleaned in 20 years. I was so afraid it had collapsed. I used the button nozzle first and made it all the way to the end of the line. Next I used the rotating nozzle which was quite amazing! You could hear that thing whirring like a buzzsaw going down that pipe! I'm pretty sure there were roots in there as I found a few small ones tangled up on the nozzle when I pulled it out. My sewer line hasn't ran this good in years. It's running like a river out there. I highly recommend this item. Now I feel secure knowing that if it ever plugs up again I can just use this. And it was so much cheaper than a plumber. I bought a 100 ft set for $65. Money well spent!

I recently found that my septic drain field wasn't draining and if I hadn't been out doing my biannual septic maintenance, by the next day we would have had sewage in the house. I quickly called a septic company and had the tank pumped the same day (hadn't pumped it in almost 10 years). Told me that an attempt to clear the drain field would cost $2500 - $3500. To clear it, not replace it. I didn't know about the distribution box, septic guy told me about it, so I quickly dug it up and got it open. Water was almost over the top of the inlet pipe. Ordered a bunch of chemicals (and got some from my local big box store) but also ordered this. Used it today and feel very confident that once my tank fills back up, it's going to drain properly. I have two pipes (corrugated) running from the distribution box to the drain field. There are 3 spray heads in the kit. A "bottle nose", a "mushroom head" and a spinning one. Directions are mostly pictures, for the wording, English is clearly not their native language so it wasn't clear to me the difference between the bottle head and the mushroom head. I think the difference is the bottle head is a little more focused spray while the mushroom head is a little less. I started with the bottle head, then moved to the mushroom head, then the spinning head for each pipe. The hose does tangle up and kink easy. It's a high pressure hose, just like your PW hose, guess it's how they work. I stretched it out across my property and let it relax, that helped but you definitely have to watch it, it will wrap it self around itself quickly. On the first pipe, I got about 17' and it hit a clog (I wrapped some of the teflon tape around the hose where it stopped, then pulled it out and walked it off to measure). Worked it and worked it and finally got past it, then it stops around 36' (I think this is the length of the pipes). On the second pipe, I got about 5' and it stopped. I couldn't get past it until I switched to the mushroom head and finally got past it and also got to 36' before it stopped. Water definitely seems to be flowing better now. We cut down on our water usage big time to save time before the tank filled back up, so I could get this done as well as get chemicals in but from the water I put in it from this tool and also a hose, it definitely is draining much better. If you have someone to help, it's much easier and you can use the attachment to your pressure washer gun. My PW is 3100 psi btw. You can do it yourself, one hand feeding the hose into the pipe while the other pulls the trigger but MUCH easier with a second person. You don't have to use the gun, there's an attachment so you can connect the hose directly to your PW but being that I was interchanging the heads, it was much easier to have my helper (wife) let go of the trigger while I changed the head. Otherwise you'll have to shut off your PW and the water, change the head, then start everything back up. I ran each head through each pipe at least twice and ended up shoveling and hand pulling a lot of sediment back out of the distribution box (good set of cleaning gloves is recommended). The heads literally pull the hose through the pipes. I have no idea of the actual layout of the pipes but they must have a minimum of a 45 degree bend, if not more, in order to leave the distribution box and go out to the drain field. Besides hitting the clogged areas, there was no problem getting the hose in there, like I said, it pulls itself through it. I had been putting in copper sulphate once to twice a year, originally just flushing it down the toilet like the instructions explain but later, after learning that's basically just throwing it away due to dilution, using a pvc pipe to angle into the pipe that feeds into the distribution box and pouring it into the pipe and chasing it with a water hose. The septic guy said I should be doing that monthly! Geez. He also pointed out some plants, I think they're called Lacy Tree Philodendron, that I had all around the septic system that the original owner had planted and said they were the worst thing for septic systems. Can't believe I never thought of it because these things are basically root systems with leaves! The next day I cut them out with my chain saw and hatchet. I ordered a 50lb bag of copper sulphate powder from Wally World and put a bunch into each pipe, via the distrubtion box, and chased it with the water hose. Once my other chemicals get here (concentrated bacteria really), I'll do the same thing. I'm also going to try and find a solution to where I can much more easily access the distribution box, vs having to dig it up everytime. Long story short, ordering this system is a whole lot cheaper than paying someone else and even if I could only use it once (which I can clearly use it multiple times), it would be worth it.

clearing blocked septic dispersion field lines

Just what I need.

عملي يساعد على فك انسداد الصرف الصحي بتقنيه وبدون جهد كبير

Very satisfied with this product. I used it on my 3200psi gas pressure washer to clean old 3 inch cast iron pipe and it worked perfectly. I used my sewer camera to verify the result. Last the the plumber changed me over 400$ for the same job .

ok