Bowtie Emblem Logo

Might want to buy the six pack. My particular application, a 2011 Silverado Z71. The material seems very well made, nice weight and texture. Mat finish but the silver I used looks nice and carbon fiber like. The heat gun on Low and the plastic tool they supply works well. Then use a NEW razor blade (not supplied, the tool I didn’t try)… and PATIENCE while cutting away the excess. You don’t want to slip and scratch the paint (if surrounded by paint), not end up cutting yourself. Anyway, glue seems not great at first but I’ll see. All in all a nice finish and way to spend an hour on this beautiful day! UPDATE: 1/24/2026 Still holding strong! I commute 40 miles a day, mostly freeway. I take my truck through the car wash once a week or so. Good stuff, make sure you clean the surface thoroughly and it holds up great!

Shipped fast. The size fits over the front emblem perfectly and after installation it look better than before. The color is different from factory but it’ll work for the work truck or an older truck needing a facelift! I’ve used these products before and it made it easy for me. However it is NOT easy if you’re not a detailed person with a steady hand. I suggest you make a template and use before you apply the vinyl. I’ll let you know if the adhesive holds after a few fins through the car wash!

**Review for Compatible with Bowtie Logo Wrap Stickers Cut-Your-Own Emblem Overlay** ⭐️⭐️ I was excited to use these stickers, but unfortunately, they didn’t stick at all! I followed the instructions, but no matter how carefully I applied them, they wouldn’t stay in place. The adhesive just didn’t hold up, and they came off almost immediately. The concept is great, and the stickers themselves look nice, but the lack of stickiness makes them frustrating to use. It might work better for other surfaces or with additional adhesive, but as it is, I wouldn’t recommend them for the intended purpose.

Not the best vinyl I’ve used, it came bent and badly packaged but if you have a beat gun it shouldn’t be a problem, I recommend being careful because mine didn’t turn out the best but it’s whatever, the blade that comes with it is extremely dull so I recommend using your own blade, clean surface with isopropyl alcohol then use heat gun and squeegee to apply, goodluck!

Cheap

Very high quality and durable. Honestly, I was not expecting much for the price. But went on easily and was easy to work with. Final results were nice. You cant tell it was my first time using it. Did the front and rear bowties on my Camaro well over a year ago. The car has been washed at least 50 times since then and not even a corner has lifted.

Just applied this to my Chevy "bow tie" and I like how it looks, prettier than the black. After using the enclosed trimmer on my front one, I thought it might not be sharp enough for the one on the trunk. But my husband showed me these little trimmers actually come with backups! You just have to break off the tip you just used (use 2 pliers, one to hold, one to break), and there's a new sharp tip below that. See breakaway lines in photo.

Trying to install this just isn’t that easy as shown. I noticed when trying to install around curves or corners. The sticker wouldn’t lay flat and kept coming up. I wish this was a king with the emblem cut out already.

Easy to make

Looks fine, sticky side is sketchy but works well.

Very disappointed, came in a ziploc like bag and all folded weirdly and only had 1 sheet when it clearly states multiple times it would come with 3. Thankfully i think 1 should get me by but im very disappointed when it shows ehat packaging it should come in and that it has 3 sheets and tools. Would not buy this again.

Le produit n adhère pas bien même si nettoyer l emplacement avant et la gratte déchire le papier qui est très peu adherent

Ce produit n’a pas résisté très longtemps aux intempéries. Je ne le recommande pas.