Rear Corner Rocker Guard

Definitely worth it! I was looking at more expensive ones and came across these. I already had the fenders and rock sliders and needed these to complete the armor. These are heavy and heavy duty. I installed them myself but I would recommend having an extra hand and some clamps! Took about 4 hours as I had to take off the fenders I already had put on as well as the previous corner guards. I made sure to line up the tail lights and the gas door before I started drilling and everything lined up great! I used 2 pairs of vice grips to hold them on as I drilled the first holes. You do need to take your seat belts out in order to get the long bolt in on each side by the bottom of the door. Also will need to cut that bolt after you install it to get the seat belt back in. If you don’t take the seat belt out you will drill into it! I have zero complaints on these. They will hold up and seem to be bullet proof.

Very heavy duty took a bit to install as I had some prior damage underneath of the area, but the items themselves were perfect. I thought they looked really good. Nice once installed 2. There's 2 spots that are kind of hard for internal screws. You have to figure out, but overall, I would definitely do them again

Great protection and looks good.But its hardware was cheap and several bolts stripped with hand tools.The corners don’t perfectly fit the radius and has a small gap but I installed black silicone all around to keep sand and water out and it filled any gaps.

Have no idea where some of the bolts go and some of them you can’t even get too and no instructions where sent plus the bag was ripped so missing most of them.

luv this stuff. great thickness. haven't beaten it on trails or have a mob of protestors or horde of zombies beating on it, but im very certain it can take a nice beating and ask for more lol. coating seems nice don't really care will touch up paint if it gets scratched. was thinking of welding spikes on the side of it ( ; if your quarter panels pretty solid you should have no problems. my rear right lower side had some boo boos from previous bondo owner but was still able to mount. think i am going to go over edges with silicone and seal it up nice so water and grime don't get trapped behind it. again I'm not making a pretty machine.. meet Vengeance lol ( ; if your want a shiny cake boy jeep this might not be for you, if you want mad max this yo sh!t lol nice and heavy and sturdy. seriously im not a weak dude n this stuff girthy lol. wouldn't recommend putting this on a ride with old worn out shocks n springs probably make you droop lol. highly recommend. if you want rocker panels be sure to get them from this company so they line up with armor properly or you will prob have to modify your rock sliders each armor usually different. half the price of other armor n just as good if not better. two thumbs up ! i also got gas cap cover really accents it all. i still need rockers if yal want to start a go fund me page that be great lol

Don't know why no one else in their review neglected to mention that these things weigh a ton.Then when trying to return the item $70 would be deducted from my returning balance for shipping which is almost half of the initial cost.Pay attention because now I know better next time to look at the weight of anything I buy and also the return shipping.

Good fit for the money. Comes with all the hardware. The edges are rough with powder coating but you get what you pay for. I would buy them again if I had too

This is a heavy duty brush guard. Fits almost perfect. Just a small gap on each side once it turns 90 degrees which can be sealed with seam sealer. All holes line up perfectly. Came with 2 small paint chips (probably from shipping) but no big deal since I'm going to Raptor liner over it.