USB C to DisplayPort Cable

I'm very impressed with this USB Type C to DisplayPort cables from WARRKY. Like a lot of cable brands, I've not heard of WARRKY before but there's plenty of unusual brand names out there these days that still make decent quality products and with much lower prices. The cables are actually quite thick and could be compared to a piece of 5A mains cable or a thick ethernet cable. This means it's less flexible than say, a basic HDMI cable, but for a permanent computer and monitor set up this is unlikely to be a problem. It should also mean than the cable is well shielded inside and less likely to suffer from interference. It also has nylon braiding around it which is a nice touch and means it'll less likely to get tangled up. It fits perfectly into my laptop and G-Sync monitor. One thing to bear in mind is that this cable doesn't have the securing clips that you have to press to release the cable from the Display Port. I actually find these tend to be a nightmare when trying to unplug because they plug into the bottom of my monitor upwards and it's really hard to press the button and remove the cable without feeling like you're ripping the port off the main board! I guess if you are constantly moving your monitor or laptop about then the cable is more likely to come out on its own but I suspect that's unlikely. I'm using 2m version of this cable to connect a 1440p @ 144Hz G-Sync monitor to my Razer laptop and it works perfectly with no loss of picture etc. I can't confirm if they work for 4k @ 60Hz but I've had cables that couldn't do 1440p @ 144Hz without causing the screen to flicker on and off constantly and that doesn't happen with this. Really impressed with these cables. Pros: - Competitively priced - Gold plated plugs - Decent quality cable (thick with nylon braiding) - Work perfectly at 1440p @ 144Hz Neutral: - No securing clips on the DisplayPorts Cons: - A little more expensive than some other brands - None so far

Was stuck with my new Acer Predator monitor requiring at least 60hz to display 3440x1440 native resolution, and my laptop HDMI output only being able to do 30hz. Researching in detail my options to solve this led me to find my laptop supports DisplayPort 60hz over USB Thunderbolt port. This cable is connected to my new monitor, and gives me the 60hz I wanted at that resolution. I can now use my work laptop at native resolution on the new monitor which solved a real headache. Cable is good quality and not too think and makes my desk neater than any HDMI or DisplayPort>DisplayPort solution would have. I also don't need a port replicator/docking station which would have been my alternative option I was hoping to avoid.

Edit: Great quality cable, brilliant support team who sent out a new cable on same day delivery after having an issue with first purchase. Hopefully, just a one off, highly recommend! 1st review: Quality of cable looks great with braided sleeve. Worked really well for 12 days. One day, went to plug the DisplayPort into my monitor and my computer would recognise the monitor then cut out and not recognise it. Tried the cable in another monitor and the same issue.

Needed a USB C to DisplayPort cable for home working - arrived on time, worked first time, if I needed another one would buy again

I recently bought a new Macbook Air with the Apple M1 chip. I sometime use it for presentations etc and also for photo processing especially when travelling. Being able to display on my Benq PD2700U monitor is therefore important to me. Having bought the MBA and tried to connect and display it I found there was a problem. Since their launch the M1 Macbook Air and Pro have suffered a problem in not connecting. It's a disgrace that months later Apple have not fixed this. My old Macbook Pro connected immediately via a dongle but no such luck here. having spent hours on the internet it was suggested that the problem was related to the HDMI connection, and perhaps try the Display Port. This brand and type of cable was recommended by another website. Success! I was on the point of returning the new MBA M1 but I was able to mirror the laptop to the monitor. If you have a similar issue then it is worth a try. Power off the laptop, connect with the cable to the Display Port on the monitor, start the laptop up, open Displays in Preferences. If necessary shut the lid to put the machine to sleep and try again. If/when it connects then go to Displays and Arrangement, this should then enable the displays to be mirrored with the cursor moving from one screen to the other and being able to drag files etc from one screen to another. I have done this a number of times now and it seems to work for me. Good luck if you need to try this with your Macbook Air/Pro.

Was on my way back from the post office, when I see a man crying in the street outside a busy hall. I ask what's wrong and he says I wouldn't understand as it’s quite tech related, but I insist. He explains that hes the technician for the inaugural Morris and Folk Dance Performance. The whole visuals for the festival relies upon a cable, and that due to its poor build quality the main performance can't go ahead. An HDMI to USB C display port cable to be exact. Imagine his surprise when out of the manilla envelope under my arm, I pull out this. He thanked me profusely before he rushed inside, I could hear cheers from the festival as I went on my way. My monitor still won't connect to my tower though

I bought this cable back because like many people I'd sold my desktop PC and only owned a laptop otherwise. If you have a laptop that's man enough to run 144fps at 2k resolution on a monitor this cable is your solution. I ran my lenovo legion laptop which has a native screen of only 1080p resolution through this cable to my superior monitor and low and behold the laptop output 144fps at 1440p on the monitor. Literally less than £20 for this product and I had money in my pocket from selling my desktop still being left with a computer powerful enough to run the monitor. This product made that possible.

I bought the more expensive Maxonar USB C to DisplayPort cable and found that the display occasionally disappeared, and that power-saving did not work correctly. This on an ancient Dell 3008WFP screen, powered by an Intel NUC10i7FNH. But the WARRKY works fine.

Ottimo prodotto! Avevo un altro cavo di un'altra marca che generava interferenze nel segnale (pixel intermittenti visibili sullo schermo). Con questo cavo ho completamente risolto il problema!

Perfect but expensive

Use it for gaming purposes as well as Samsung dex, works flawlessly. No issues in compatibility with even older devices.

This Warrky USB-C to DisplayPort cable works exactly as advertised. Plug-and-play right out of the box, with a snug, secure fit on both ends. The metal housing and gold-plated connectors feel very durable and high quality, not flimsy like cheaper cables. I’m running it with a USB-C/Thunderbolt device to a DisplayPort monitor and get a clean, stable signal with no flicker or dropouts. It supports up to 8K at 60Hz, 4K at 240Hz, and 2K at 360Hz, making it great for high-refresh monitors, productivity, or gaming setups. Fully compatible with Thunderbolt 5/4/3, MacBook Pro/Air, iPad, Galaxy devices, and more. The length is exactly what I needed, which helps keep my setup clean without excess cable clutter. Overall, this is a reliable, well-built cable that delivers excellent performance and feels like it will last. Highly recommend if you want quality without headaches.

lo tengo conectado a de una Mac mini a un monitor QHD a 165 hz los da perfecto.