Super Thin Flat Wrenches, Metric

Works, seems strong. Nice and thin. What else to say.

This very thin design wrench did exactly what I needed it to do; to fit into a very small area to loosen a nut on a wheel I was replacing on my Kamado KJ grill. I feels very solid and well made too.

Good for the tight situation is is a real saucy wrench...

Had to buy this thin wrench to properly torque the caliper bolts and its sliding pins - the sliding pins were 17mm with thin heads - for a 2016 TLX's rear calipers. Very happy with the quality of this thin wrench when compared to other thin wrenches which are mostly made of stainless steel that bend. The other end has 16mm and hope I don't have to buy other sizes for my other current/future vehicles.

So far this tool has held up for my needs, I was in a situation where I needed a thin 7 mm open end wrench for servicing my mountain bike dropper post, surprisingly I didn't have one, so I ordered this wrench which seemed like high quality and thin enough for the job, while I didn't test it on super high torque applications, I tested it up to 5 nm, and it worked fine, the handle is long enough to provide good grip and leverage and seems well-made, no marks or slipping noticed.Overall I highly recommend if you are looking for a thin open-ended wrench.

Works perfect and can get on almost any nut regardless of access. Only complaint is, with gloves on it’s almost impossible to pick up off of a flat surface because it’s flat and so thin.

Worked perfect to release a stuck grinder wheel on an angle grinder.

So shiny and a comfortable weight. It has a radius on the corners but a fairly tight one so it still feels very rectangular in the hand. I think this is the most comfortable wrench I've ever used. I'm doing light duty stuff, working on electric scooters, and the reduced thickness is just right. It's certainly not a specialized ultra-thin wrench for bicycle brake adjustment or cones. But it's much nicer than a full automotive-thickness wrench and it seems very strong and easy to handle. It slots nicely onto my metric axle nuts.

Llave de muy buena calidad y acabado además de práctica por ser muy delgada

Nice and slim, also feels tough, I bought for removing pedals so I’d recommend wrapping some padding around the other end to stop it digging into your palms on tough pedals!

La chiave è buona e funziona bene, a dire la verità io l'ho comprata per lavorare su unmozzo di una bicicletta ed era comunque troppo spessa. Comunque è colpa mia che non ho controllato lo spessore in descrizione.Ottima qualità

I have a sliding bathroom door that is incased in a wall.The leading edge of the door is supported above with an adjustable 10 mm bolt that loosens with use and is really hard to access.The gap for adjustment is really thin and nothing, in the way of normal open ended wrenches fitted.I tried grinding regular wrenches but I found that compromised the integrity of the wrench and the jaw opened up when I tried to use it.I then found Capri Tools and bought a Super Thin Open End Wrench and it fitted easily and I was able to tighten the bolt with no problems.The wrench is super strong too and made well.

Se siente de calidad excelente pulido y sobre todo muy delgada entra donde sea yo la uso para los conos del rin se mi bicicleta y funciona genial podría decir que está mejor que las llaves de cono park tool