Chrome Projector LED Bar

Very well packaged each individually. Came in their own box. Packaged very well not to be damaged on my 2011 ram 1500 Big Horn. They were plug and Play. The headlights need to be upgraded. I think down the road when it's time. They're still bright but not as bright as I like them. The only issue is that set screw to adjust the headlights up and down doesn't match up with the original hole so I had to drill a new hole. But other than that, great product and they look really cool at night

These installed easily and look great, working very well so far. Can't beat them for the money, stock replacements are ridiculous. They were aimed pretty high right out of the package, had to go down around 4 turns to finally stop getting flashed all night. I will say the brights are less than I expected but still work well. The packaging was really nice and well protected. Comes with an adapter harness if you're switching to projector style.

Perfect fit to replace OEM lamp assembly that was full of water. Run this through the car wash several times no water penetrates. The black style light looks a lot better than the original chrome light. Considering the $900 per assembly cost from Ram this is an awesome choice

First some background. I have a 09 Ram 1500 with the original headlight housing. I have used true HID, xenon, and LED bulbs in the past and my High and Low beams were one bulb. I was hesitant to order these because I felt some information was left out and there wasn't a lot of pictures or explanations. First picture is off and compared the originals. Second running lights on, I do not have DRL so these only come on as a parking light unless you have DRL. Third is Turn signal, they are not sequential but they are bright. Forth is the beam pattern on low and lastly the beam pattern on high. Install was a breeze. Took all of 15 min. All bolts are 10mm. Remove the top fan cover by popping it off, Then you have access to the bolts for the grill, 4 in total. After the grill removal you have access to the two bolts for the lights. Behind the mud guard is the access for the retaining latch, push up and the lights come right out. Install is the same steps but backwards. The green plug is headlights and the black plug is turn signals. On the driver side you will need to drill an access hole to adjust the beam up and down. No big deal, a hole large enough for a long Phillips head screw driver. Adjusting the beam to proper height is also pretty simple. Find the little divot on the lens and measure to the ground. Find a flat surface and something to measure the beam height, I used a warehouse. Have your headlights 25' from the surface you want to use to adjust your beams. At 25' you want about 2" of drop. So my lights are 3' 1" from the ground, at the wall I dropped them down to 2' 11". This gives you a gradual drop and doesn't effect on coming traffic. Both High and Low beams are bright but do have some hot and cold spots. I am replacing them with slim fit LEDs but I suspect they will have hot and cold spots as well. The beam is nice and straight with the exception of the center of the light beam which is common in projection lights. I do wish there was a horizontal adjustment screw. These come with a hyper flash module to prevent hyper flash and currently have no light out warnings or hyper flash. For the money these are great. The seals look good. The only issue I have with these are the placement of the height adjustment screw (easy fix) and the passenger side plug was slightly damaged upon arrival but I have reached out to the seller to resolve this. I would recommend these to anyone looking to swap out their OEM headlights. For the features and looks the price is on point. I plan on to revisit this within 6 months to a year for a follow up on these lights. Hope all this information helps!

I purchased these headlights and the seller sent the what looked to be USED ones. When I reached out, they refused to refund me, even though the mistake was on their end. I had to pay out of pocket just to get them installed, and even then they only work half the time. They turn on and off randomly, which is unsafe and unacceptable. Now I have to pay someone again to remove and replace them. Terrible experience from start to finish — avoid this seller.

Look and work amazing! I have a 2017 Ram 1500 and recently added the gloss black projector switchbacks. I had my factory quad headlamps with led bulbs previously. So I put LEDs in this headlamp before I even installed them. I went with autoone bulbs for lows and sealight for highs. There isn't much room for high beam base and with wire attached I couldnt get the autoone or any normal base bulb to lock in at 3 and 9 the way I wanted. The low beam locked in at 3 and 9 fine. The sealight bulb I used has a small heat sink and separate decoder box (pretty small). The issue with other bulbs is the connector is at an angle and there isn't enough room to get it locked in place. Switchback functions and adjustability of vertical works perfectly. It's raining and I am not getting any fogging. The low beam pattern has a nice crisp cutoff and with the led clocked at 3 and 9 there is no scatter. These were plug and play so no install issues. They look like they came with thr truck. Love the switchback function. I was getting the parking light out when lights were turned on and turn signal was turned on. I changed all bulbs to led with alfaobd and after a day or so I haven't been getting thr light out warning. I did buy a set of resistors that I will install if the error comes back as it was annoying. I will update if there are any issues.

⭐⭐⭐⭐⭐ **Excellent Product** The product arrived in excellent condition, very well packaged, and exactly as described. Everything was in perfect shape, and I’m very satisfied with my purchase. Great experience and highly recommended!

These upgrade headlights fit like a glove! They look like the premium trim level Ram headlamps. I love the fact that all of the lights (turn, marker, DRL) are all LEDs. The signals are bright and the DRL's are nice and bright white. I personally upgraded the bulbs that came in these units to make the up-front LED conversion complete. I highly recommend that for anyone looking to buy these lights. The original halogen lamps are "okay", but if you want to get the most for your efforts, spend the extra $50'ish bucks and order a set of LED high/low replacement lamps for these headlight housings. You can find them her on Amazon. You will NOT be disappointed. 10/10 Highly recommend these Headlights for anyone wanting to upgrade their Ram to better nighttime visibility.

They are great!! I’ve had them installed on the truck for a week and seems to work good. They look good too!

Liked how shipped the quality of product and fast delivery!

I don't wright a lot of reviews, but I'm really happy with these lights. My factory lights started filling up with water and the driver side turn signal shorted out. Mopar wanted $1,308.00 CND per light to replace so, like all OEM parts I found an aftermarket option. Very easy to install, although they said the they come with H7 (which I switch to LED) they actually came with H11. The clarity is perfect and they look a little different but good. The daytime running lights are still amber but at night it switches to white. Very bright too (with LED). I would recommend!

Bad customer service from the seller!!! And the drivers led light marker/signal light stopped working in 4 months. Would not recommend

The product arrived promptly and was simple to install. They look and function as well as the stock lights that came with the truck when I bought it.