1156 7506 LED Bulbs

Incandescent reverse and brake lights have been the automotive equivalent of using a candle when a flashlight exists for decades now and LED replacements like the AUXITO 3157 are the easy fix that should have happened at the factory. Dropped these in and the difference versus the stock bulbs is not subtle — it's the kind of improvement that makes you wonder how you drove with the originals for as long as you did. Direct 3157 socket fit means this is a plug and play swap with no wiring, no resistors, no adapter harness. Pull the old bulb, push the new one in, done. The cross compatibility list covering 4157, 3156, 3056, 3057, 3047, 4057, 3457, and 4114 applications means these cover a wide range of exterior lighting positions across multiple vehicle makes without hunting down position-specific bulbs. Brightness on the reverse lights is the most immediately noticeable improvement — backing up at night went from "hoping nothing is behind me" to actually illuminating what's back there with enough light to matter. Brake light visibility improvement is the safety upgrade that pays dividends in traffic without anyone behind you having to question whether your brakes are actually applied. Heat output is dramatically lower than the incandescent originals which matters for socket and lens longevity on older vehicles where the housings have already seen years of heat cycles. Running cool means the lens stays cleaner longer and the socket doesn't continue degrading. Pack of two covers one application completely — both sides matched in brightness and color temperature for a clean consistent look. White output is crisp without the blue tint that makes some LED bulbs look aftermarket rather than intentional. Simple upgrade, immediate results, highly recommended.

I was looking for a bulb that would actually light up a good distance for reverse, most bulbs are not as bright as I would like. These ones light everything up very nicely! They're really bright, almost identical to oem size. Slightly longer with that little dome at the end, but not really an issue in most applications. Would highly recommend. Will buy again if I need to, but these bulbs will probably never need to be changed again.

These lights arecmuch, much brighter than the original bulbs, they're not polarity sensitive either. That makes them very simple to install with no fidgeting, I can't attest to longevity as I have only had the.m for a few weeks. I put these in my riding mower & they're awesome.

I deliver newspapers for a living, and as part of the job I am often backing into/out of driveways and executing tight turn-around maneuvers in the dark. Being able to see is "kinda" important. While the factory incandescent bulbs of my '99 Jeep Cherokee were good, I was searching for something better. Being that my vehicle is wired using the "CK Method," I needed to make sure any LED replacements were compatible with this wiring system. (LED bulbs that are incompatible will blow fuses immediately, so it's definitely something buyers need to be aware of.) These Auxito LED bulbs ARE compatible with both "Standard" and "CK" wiring, and are designed to eliminate the need to check proper polarity - in other words, these bulbs will work no matter which way you install them into your sockets, on the first try. It takes more circuit design know-how and electronic components to achieve this, so I appreciate the extra thought and production costs invested - Auxito could have taken the cheapest route to maximize profits, but they didn't. According to what I've been able to glean from the item description, these bulbs are not compatible with vehicles that use CANBUS. I don't have any vehicles that use CANBUS communications, so I cannot verify - however, there is a CANBUS-compatible version from Auxito; if you have a vehicle that uses CANBUS, I would highly suggest you choose that bulb instead. (Unsure if your vehicle uses CANBUS to determine if a bulb is out? You might want to consult a repair shop, preferably a dealer that sells your car's make because their Service department should know that.) I've had them installed in my Jeep for several months now, and the difference is almost mind-blowing! Bright, crisp "pure" white (not that bluish-tinted "cooler" color temperature) that illuminates everything behind me very well. I don't see any odd "hot" or "cold" spots in the light output, as is common with some other brands. I have seen no drop in total light output over time (LEDs get dimmer if they're being "pushed" too close to the "limit"), and believe me when I say my backup lights easily see 10x the use an average driver will subject them to. I have not installed these bulbs in a place where they see constant operation (parking lamp/turn signal or tail/brake) but I feel pretty confident in saying they'd be a great upgrade for those applications as well. I'm quite impressed with these bulbs, and I would highly recommend them to anyone looking for brighter illumination when reversing - or, if you're converting your car to all-LED for the aesthetic and want an amazing bulb for your reverse lights. In fact, I'm so impressed with these bulbs, I'm about to add another two-pack to my cart to replace incandescent reverse lights in my mother's '07 Grand Caravan, a vehicle that SERIOUSLY needs brighter reverse lights due to the factory window tint.

Light bulbs did cause some hyper flash issues but they are nice and bright and they seem to be lasting a decent amount of time so far compared to the other ones I bought that only lasted a year. These are lasting a lot longer. They are a little bit more money, but I think they’re worth it. Installation was easy no problems there nice crisp amber light.

These bulbs exceeded my expectations. Installation was very easy because they are direct-connect and non-polarized, so they worked instantly. The difference in brightness compared to the original bulbs is enormous; they provide much better illumination when shifting into reverse, especially at night. The 6000K white light looks modern and crisp, helping to improve visibility when parking. Furthermore, they do not flicker or trigger any error messages in the vehicle. The build quality feels excellent, and the compact design fit perfectly. An excellent choice if you want to upgrade your car's reverse lights.

I got these bulbs for my 2012 Toyota Yaris license plate and they are a massive upgrade. Installation was super fast, just plug and play in under 5 minutes with a perfect fit. The light is a very clean, crisp white and way brighter than the stock halogens. They don't flicker at all and make the car look much more modern. Without a doubt, I will be buying them again.

Brilliant, bright white. I can actually SEE when backing up in the dark! I will never not replace my reverse lights with these or similar from now on. The difference is like night and day!

لم تركب على قاعدة لمبة سيارتي GMC بمقاس HT7441

These bulbs were easy to install and are insanely bright.

Running these in an older Ford pickup. Noticeable difference in brightness over the old incandescent bulbs. I did have to wire in resistors to get the signals to work properly, even with an electronic flasher relay.

Good brightness but one bulb after 2 month not working any more

Muy buena iluminación, nada exagerado, no marca error en el tablero