Tub & Tile Refinishing Spray

We had a brown stain on our tub which was very visible. It looked like a brown rectangular patch that had been done by the previous owner. It was very visible to anyone who used the tub or shower and it was in our guest room. My wife kept complaining about the look of it. I bought this product and read the instructions. The instructions are printed in " micro font" on can itself. I had to get a flashlight and reading glasses to see it. Basically shake the can well, ventilate the room, try not to breathe the fumes and spray from a distance of 12 inches. I applied multiple coats and used an old wash cloth to smooth the edges after spraying. I opened all the doors and left it for a week to cure. It looks very good now and the brown stain and patch is barely visible. I would say it worked great. It dries very hard and blended very well. I bought the white color for a standard ceramic tub. When my wife saw it a week later she loved it. I would definitely recommend this product.

We originally painted our shower tiles with the paint can version of this product. We got this to touch up areas. It is so much better than the canned version because you can use this spray paint on multiple days. There isn't a time limit due to mixing. The odor is very strong. It is a must to open windows and keep the room ventilated. I would even suggest wearing a mask! This product covered the tiles perfectly! We let it sit for a week before using the shower. To allow the resin to cure. We did the scratch test on the tiles. It was well covered and didn't scratch off. It will take a few coats for this to really cover well, but it adheres so well to the tile. It is a bright white that really gives the bathroom such a bright and clean feel. Easy to use as well.

I have plastic sinks in my RV. I wanted a better finish to the kitchen sinks so, hey, try this epoxy product. I have used this type of paint before on my sailboat with great results. The trouble is you have to be patient. PATIENT!! It has to dry for 3 days!! Are you kidding me? Three days? Ok, I ordered a can and followed all the instructions. It set off my foul air alarm within seconds. I realized that an open door was not enough. Put up fans, engaged the exhaust fan, and blew what was left out the door with a large fan. And the result? One can was not enough to do two normal sized plastic sinks in my kitchen. I waited three days, sanded with 400 grit wet and dry paper, taped it all off, and used my second can to finish the job. It is still not perfect, but is acceptable. Now I am on my third day and the damned sinks are still offs-gassing. Tomorrow I may be able to use them.

There are SEVERAL ISSUES to complain about this product! First... I would like to point out that I myself am quite experienced with finishing with all kinds of products, spending several years of my life in the profession of doing high-end finishing and refinishing of metal and wood surfaces. It does not surprise me to see other reviews raving about this product. These are clearly from people that I feel do not know much about what they are talking about. So... here are my notes> 1) When (1) can cost close to $13, you would think that there would be enough paint available to adequately cover several square feet. This so called "epoxy" paint sprays out and covers in what I can best describe as ANEMIC. It will take several spray applications to simply build up the color to a point where it doesn't appear splotchy. You will need probably 6 or more cans to cover the surface of an entire tub. That in itself is bad... but that's just far starters. 2) The absolute pure white color will not match any "normal" white color of a bathtub (bathtub white is almost always subdued or off-white). It's hard to believe anyone would not notice that! 3) The "epoxy" paint lays on and dries without settling in like a normal spray paint such as lacquer or enamel, resulting in a very inconsistent and rough surface. One might suggest to simply spray more during each application to let it build up (filling in the porosity), but that does not work... and in the meantime you will have already used up one whole can for just a square foot! Ultimately, the surface needs to be wet-sanded appropriately to attain a smoother surface. 4) Along with all the issues that I just described, this spray expels some of the most noxious fumes you will ever encounter! Be prepared, and be sure to fully protect yourself, along with a fan in the window to draw out ALL those horrible fumes! 5) The preparation instructions (prior to actually applying this product) are long and detailed, describing the importance of cleaning and roughing up the surface for reliable adhesion. But, it's almost as if Rustoleum had never really worked with a bathtub ceramic surface to test their own product. When they describe sanding the original ceramic bathtub surface with regular sandpaper, this clearly shows they don't know what they are talking about. The ONLY material that will physically/mechanically etch a ceramic bathtub finish is real diamond abrasive. Fortunately, diamond cutting pads are readily available and affordable. I recommend starting with 100 grit to get all the high spots leveled out to the lows. At that point use 200, then 300, to get a fairly smooth 100% truly etched surface to spray on. That is the ONLY way to assure dependable adhesion (for any kind of paint). I will say one thing about this process... it's not easy... and will probably take a few days to complete just the preparation. But it's worth it. Final Note- I ended up just using this Tub& Tile paint (3 cans) as the undercoating/primer. After I wet sanded down all the roughness of the Tub&Tile paint, I actually used Rustoleum Professional Appliance White Enamel as a top coat, which yielded a much better finish overall. It's been 2 years since, and holding up and looking good. In my view, especially for the price, this should and could be a much better product!

This product did exactly what I needed it to do which was cover a small area I needed to repair after doing a compete bath tub refinish. There was an area about 12" x 12" where the refinishing product didn't adhere because I didn't prepare it properly, so the finish bubbled after a couple of months. I removed the finish that didn't adhere with a razor blade scraper, cleaned it well with acetone and applied the Rust-Oleum product in about 6 coats until the area was covered. I did this right before leaving on a week long vacation so it had plenty of time to cure. It looks great and matches the tub refinish color pretty well. It does had a strong lingering smell, so open windows and close the door. I definitely wouldn't use this product to do a compete tub refinish. You need to buy the roll on, two-part tub refinishing product and use this for small jobs and repairs. Just my opinion based my experience.

I have used the lg Rustoleum Tub & Tile kit and this spray botte version, and this review is based on the spray but in comparison to my experience with the large tub kits. I would rate the large tub kit only a 4 because it too has challenges. This spray version only gets a 3 becuase of the following reasons: it's very thin coating and you will need at least 4 bottles to cover a full tub, you don't get new shiny coat, and it is very thin and runny. On the plus side, the odor is not nearly as intoxicating as the large tubs and you get a bit more of a control with a spray rather than the large goopy tubs. The large tub version coats the tub with a beautiful glossy finish and it makes your tub/sink look brand new, but the spray leaves a very matte finish. I find that the spray version is also a bit easier to sand any runs from over spray or tiny bubles rather than the goopy tub version. The bubles are result of a combination of temperature (humidity) or overspray, and I've practiced enough with spray paint cans that I learned from my mistakes. To get the bubbles or over spray out you can just wait for it to dry and then sand it down and paint over it. My biggest problem is the waste because the large tub version is way too much product to cover a sink and I ended up throwing it away, but they also have small bottle versions, which are waaaaay too small and are only good for touch ups. They need to make a medium size version because if you are only going to cover a sink, you will have to throw out half of the product because the remainder has to be used within 4-6 hours or else it solidifies. For the most part, the spray covers fairly evenly and it's easy to use but not a permanent solution. At the very least, it covers some stains and imperfections you may have on your tub/sink and it will improve the look but it will not look brand new.

Drying Time 25 Minutes First Coat, Smooth Finish, Color White, Shake Container Well for Spray Performance

My husband and I have an awful fiber glass shower. The pan got a crack in it and we ordered that square patch you see. It drive me nuts though that the patch was white while the rest of the shower is a bone color. I wanted the whole pan area to be the same color. I bought this paint and followed the directions on the can. I taped a line on the wall so that it looked very obvious that I was only doing a certain area. I did this on a weekend that my son and husband were gone so i was sure it had enough time to dry and cure. I’ve had this on the shower for several months now and it seems to be holding up well. I just need it to last long enough for us to rip this shower out to install a new tile one but so far this is holding up and looks a ton better than what was there. I will say the smell of the paint is ridiculously strong and toxic smelling. You want to do this when you can have doors and windows open. I opened the bathroom window and my bedroom windows doors while closing the bedroom door to the rest of the house so the smell wouldn’t infiltrate the rest of the house. Also…wear a mask!

It works like magic.

Très bon produit

Parece cerámica de verdad. Hay que mirar mucho la pieza para encontrar los defectos. Y esos defectos son por la preparación previa, no la pintura.

نفس الصورة بالضبط ..مغلف جيدا وجديد واستخدامه جميل جدااا ولونه قوي

I bought the bone color spray from home depot. Needless to say, it wasn't the color I wanted but that was all they had in stock during that time. I used it and it came out pretty poor. It had a rough texture, and 1 can of bone color could only cover 10 sqft with 1 coat. I bought the white color from amazon (the color I actually wanted), and I bought 2 because of my first experience with the bone color. But I was impressed with the white spray. It actually gave me 2 coats for 10sqft. And it spray on way nicer. Smooth to the touch, and larger spray coverage. I'm keeping the 2nd can because it worked so well. I would recommend this product, but I would avoid the bone color one and go for the white!