MAGWSM2

This is a great phone holder for my car! I really like how compact it is and how little space it takes up on my windshield. The magnetic mount is strong, and the suction cup stays firmly attached to the glass without coming off. The adhesive/suction grip is excellent and feels very secure, even while driving. I also like the 360° adjustable head, which makes it easy to position my phone exactly where I want it. Overall, it’s a simple, well-designed, and reliable phone mount. I would definitely recommend it for **iPhone, Samsung, and other smartphones**. **Great product and definitely 5 stars! ⭐⭐⭐⭐⭐**

This phone mount is great! I highly recommend this purchase. I deliver for a living and my phone being a tool and not a distraction is a vital part of that. The holder I had previously bought had been of the vent clip variety. Since I also need to have a heavy duty case to protect my phone the weight made it constantly come loose and often fall off. I was able to place the magnet between the plastic case and silicone covering and it worked like a charm. I followed the directions for installation. After waiting an hour it held wonderfully. I had no problems until recently when a streak of hot weather came through. As I was leaving for work one day phone and mount fell off the dash. I was anticipating this as I had read many reviews before purchasing. I didn't have any adhesive residue left on the dash as I had heard in other reviews. (90's not hot enough for that problem?) There was a small amount of hair and dust accumulated around the edge of the cup. I used a damp lint free cloth(polyester) to wipe it clean and wiped down the dash. I put a little water(not enough to leave a puddle) in the suction cup and swiped it around before installing it as I had before. I have had no problems in the weeks since then. I would suggest checking it after it's been closed up in heat or there has been a hot spell. I may try to find a place to put it that receives less direct sunlight but I also need it convenient for work.

I've been using my MagicMount to hold my iPhone 6 Plus for several weeks now. It's great: very convenient, solid, and hold the phone securely. I already had a plastic disk mounted to my dash for my old GPS unit. I peeled the liner off the adhesive suction cup on the MagicMount base and stuck it on. It's rock solid and hasn't come loose. I'm not sure if the adhesive will prevent easy removal and reapplication (in a rental vehicle, for instance) but I'll cross that bridge when the time comes. I removed the thin case from my 6 plus, and put the MagicMount's metal disk between the phone and case. I did not use the adhesive on the disk; the snug fit of the case holds the disk in place perfectly. Now, when I hop in the car, I just place the phone up on the magnet and it grabs on. The magnet holds my phone securely, even being a large "heavy" 6 plus. The surface of the magnet also has a grippy rubber section that keeps the phone from slipping or rotating. The only downside (and it's a very small one) is that the "neck" of the mount isn't at rigid or stiff as I'd like - on some roads, the phone has a slight vibration that's slightly visible on the screen. A slightly stiffer neck would have made this practically perfect. I also like that the mount included an extra disk so another device could be attached as well - I use one for my phone and another for my iPad while I'm parked, to Netflix while I eat, etc. After using this one for a week or two, we bought the lower profile version for my wife's car. Highly recommend this mount.

This is a review of the "Window/Dash Mount" version of the product... For the record, I have a Galaxy S4 and use the "Wollony Rugged Hybrid Dual Layer Hard Shell Armor" case for my phone. Overall, the mount does precisely what I need it to do: Hold my phone securely in a single position with minimal movement while I drive. I use Waze for traffic alerts, so having a phone held in a single position with minimal movement is ideal. My previous mount was a vent mount that "gripped" the phone from the sides... And that was not ideal. The setup for the phone is straight forward. I already had a mount on my dashboard from a Garmin GPS unit, so I just used that for placing the suction mount. Between the sticky surface and the suction, it holds very securely. The swivel head allows for a large degree of movement, so placing the mount in the right position is just a bit of work. Once in place, the mount hasn't moved so much as a centimeter. The metal plate for the phone required a bit of trial and error. Initially, I placed the large plate between my phone and phone case. Unfortunately the thickness of the case interfered with the magnetic attraction to the plate, so my phone would slide during my drive. And a large bump would knock the phone completely off. I decided to place the plate on the exterior of the phone case, and the magnetic attraction worked perfectly. The "grip" between phone, phone case, and mount is ideal for keeping the phone level and in a single position during the entirety of my drive. So, the set-up works perfectly for my purposes. The small plate that attaches to the case is a bit too small for my purposes, since the back of my phone case is not perfectly flat, but the large plate works well. Ideally, the manufacturer could offer metallic "strips" that could adhere to smaller spaces on different cases, but that is a minor issue and is largely cosmetic. I also followed other reviews, and made certain to let the large plate "adhere" to my case for 24 hours to ensure that the adhesive wouldn't fail from use. I do not recommend using either plate directly on your phone, and would recommend using it on the case instead. (Replacement plates are available for minimal cost, should you decide to replace the phone case.) Overall, depending on your specific phone and phone case, this is a good dashboard mount. You may have to experiment a bit with the exact arrangement of the plate versus the phone versus the phone case... But I've yet to experience any significant detriment or problems. (If anything changes in the next month, I'll edit my review accordingly.)

The mount in my new truck is the same one that has been in my old truck for the past 2 years. It has been removed 5 or 6 times for windshield replacement and just trying different locations. It is now on the dash of my new truck. It has NEVER lost suction and the magnet has NEVER dropped my phone. I have a 4 wheel drive and it has been over some pretty rough terrain. I have owned at least 8 different mounts prior to the SCOSCHE, and none have even come close to performing the way this one does. I bought a second one I keep int the shower to hold a mirror for shaving. I love the ease just slapping my phone on the magnet and not having to squeeze any clamps to install the phone, and grabbing it with one hand when exiting my truck (vs. holding the phone with one hand and releasing the clamp with the other hand). I don't know if all of the suction cup mounts have the sticky rubber on them, but the 3 that I have bought (the third one was for a friend) have all had it and it doesn't let go until I put quite a bit of effort into removing it. I live in Louisiana, so temperatures can reach +130 degrees inside a vehicle during the summer months. Where other mounts loose suction in extreme conditions, The SCOSCHE stays securely attached.

Was pleased with this mount immediately, but didn't truly appreciate it until I took an extended working trip in Hawaii. The job required a daily roundtrip drive over a patch of rough roads in a 4×4 (stock Jeep Wrangler Unlimited). Long ago the road was paved, but only pieces of the asphalt remain, leaving potholes and ridges where it's broken away. I would characterize it as very rough, and some of it is on a decent grade. At first I took it slow but eventually, after a few days, I wanted to see what the Wrangler could do, so I cut loose. The Jeep did great, but do did the Scosche: The adhesive/auction mount never failed, and the phone didn't slip a bit. I am extremely impressed,. Note that my plate is mounted to the back of the defender case. I tried mounting it to the back of the phone but the gap between the plate and the mount that the defender created secretly reduced phone stability. And that was on regular street driving: would be even more unstable on rough roads like the ones I've been on here in hawaii. I spent some time trying to find a good clamp style mount for the note 4 with defender but that market is secretly limited. The scosche is the way to go: hard to believe it's so effective and so inexpensive

Good product overall, but it arrived without the metal plate, so it’s essentially unusable.(

So yeah, it is a great product, it sticks very well, the magnet is powerfull enough and it works with a variety of case, but my problem began when I wanted to take the mount out of the windshield. I kept the mount for a long time, I'm unsure if it got to a year, without taking it off, where I live, here in Puerto Rico, it always sunny, so I needed to take the mount off and it looks like with the heat and the time it was kept there, it melted the glue. When I took it out, the windshield was covered with the glue resude which is very sticky, I tried cleaning it with windex, alcohol and nail polish remover, the glass is still smugged. I would buy another just because of how tough they are, but I would take precaution taking it out if you live in a hot area.

Muy buen producto, lástima que a diferencia de paquete individual, trae menos accesorios, pero vale mucho la pena, si lo recomiendo.

I didn't buy this for my mobile phone as I had another application in mind to mount my tobii 4c eye tracker underneath my curved monitor. As you can see from the photo, the magnet in the mount is sufficient to attach one of the tobii mounting strips to and then attach the tobii which is also magnetic to that mounting strip. To say I'm impressed with the strength of the mount is an understatement. My eye tracker is held incredibly firmly and I can't dislodge if from the mount without a lot of force. It's solved a reallyt tricky mounting problem with no modifications to either the eye tracker or the mount. I can imagine that using it with a mobile phone where necessary would be just as good.

Works well, strong magnet, solid built

Piccolo, di aspetto robusto, piastra magnetica regolabile, ha un sistema di ancoraggio che utilizza non solo la ventosa, ma anche una base gommosa appiccicosa che sicuramente rende la presa molto più durevole, ma potrebbe lasciare residui sulla superficie alla quale viene ancorata. Questo particolare purtroppo non è specificato nelle caratteristiche del prodotto e valutabili prima dell'acquisto.

I've tested various models & brands but handsdown this has got to be the best valued for money. Moreover I did have another model from Scosche that was mounted via the aircon groves and the magnet is as good as this. This really holds on firmly and does not vibrants like other brands does. Awesome product & no regrets!