HNDS5B

I bought this monitor swivel mount for my desktop computer. I like to use two monitors for multi-tasking work and the option to throw on a youtube video or movie on one while i code on the other. Anyways, after I received my new mount in the mail I opened up the package and immediately noticed the quality of this swivel mount is really nice for the $60 bucks i paid for it. Pros > - Awesome Price. - The mount is really sturdy when secured to the desk even w/ the non-evasive setup, I didn't even have to drill a hole in my desk it literally does not need it. - All of the materials used have a wall thickness that is above what is required for 10-20lb monitors which gives everything a nice solid feel (aka not some flimsy cheap aluminum crap). It's really well built in my opinion. - Everything feels nice and secured and the adjustments to get everything just right is really painless. They provide a few different sized allen wrenches w/ your mount and all you have to do is loosen or tighten 1 or 2 bolts for each monitor depending on how you have them setup. - The manual is straight forward and simple. 20-30 minutes to unwrap and setup. if you're not so handy it might take an hour but you can't really mess anything up. - Great cable management they provide plastic pieces underneath the swivel arms to hide your cables. Suggestions > - 6 ft. cords are the bare minimum you can get away with on this mount. It only worked out for me because my desktop computer sits on my desk, but they only have maybe 5-6 inches of slack I'll probably buy longer cords eventually. If you're like many people and your computer sits under the desk on the floor chances are you need a longer cord than is standard w/ your monitor. I would suggest investing a few bucks on getting 10ft HDMI, vga, dvi, DP or whatever you connect your monitor w/ to your computer. Power Cord you can just use an extension cord if need be. Edit: I've read a few reviews about the gas spring arms not being able to handle the weight of a larger monitor. So I thought I'd weigh in. I have a 27" and a 19" monitor the 27" is 12.5lbs and I had to loosen the gas spring quite a bit to get the arm to lower to the desired height. That being said it handled my large monitor quite well and from the feel of things I could easily add a larger monitor without worry. That's just my mount though maybe others are getting a gas spring in their swivel arm that is malfunctioning or something. Hope this helps..

This is a great system. Very flexible on install. I have two 24" TV's installed 8.5" above the desk, so they are at my eye level. Mounted so only about an inch from the wall using he clamp. This gives me nearly all of the desk as usable space. This was done by using one complete arm that extends directly out to the right and one that uses only the first 1/2 of the arm on the left. In this way they don't need to extend behind the desk and stayed close together. Left one is less than 8" from rear of the desk and right one is slightly angled and 8 on one end and 10" on hte other. My two desk phones, stapler, tape etc tuck under the right s to utilize desk space. Note pads, cell phone, Chat 50, and TV Controls are under the left unit. Sorry the picture cuts off and does not give full view. But Desk Top space is fully usesble. I have been using now for a month, with no sagging or issues as some have stated. Just fully tighten the screws as directed and works fine. Took me about 15 min. to put together. I highly recommend spending a little more for this unit vs the lower costs ones. What is your time worth to mess around adjusting sagging and less flexible units?

Since I have a small desk, I always want a solution to organize my things within my PC setup. This product did save a massive amount of space. I've tried different monitor setups but this one shown in the picture (sorry for the bad cable management) is the best one for me in terms of saving space. Pros: -Very sturdy/ Great build quality: I'm using a 27" monitor and a heavy af 29" ultrawide monitor, and they're holding up well -Took me 20-30 min to assemble; clear instructions -Can adjust freely; great range of motion Cons (not really): -It might just be me, but the monitors wiggle whenever the desk is shaken. It's probably because the desk is not touching the wall Conclusion: 10/10 would recommend; worth the buy!

I have a 34" sceptre ultra-wide monitor that fits wonderfully on this. On the other arm I have a laptop attached via a different plate that is compatible with vesa mounting. I actually have the arm attached to the monitor only one segment long, rather than the pictured two. Pros: - very sturdy in comparison to others. I tried one by north bayou and had to return it because it was pretty garbage and wobbly. the design of it was bad, where as this one by huanuo is really nice. - very easy assembly, took me maybe 45min total to put together including mounting my laptop and the monitor and doing all the cable management. 15min of that was searching for one of the screws that helped tighten the arms to eachother that had fallen out during shipment, but it comes with two spares so no worry, I also found the original screw in the box anyway. - very easy to position. The one issue I have with it is that, unless you really tighten one of the junctions to the vesa mounting plate, a heavy monitor will tilt forward quite easily. So tilting up and down is going to be a bit of a pain, but thats a very small price to pay for being able to tilt it easily and securely side to side, rotate it, move it backwards and forwards, side to side etc. everything is easily adjustable and tightenable. - cable management is pretty easy to use with this set up requiring you to simply push your cables into a clip type tray mounted beneath each arm. Cons: - The cable management solution could be a bit larger to accomodate multiple larger cables. It works fine, though it can get kind of tight with a thick power supply cable and a display port cable. More can fit, it just gets kind of tight :/ - The center pillar is difficult to tighten once completely assembled, and due to the nature of the arms' attachment to the pillar, if you try to rotate them around it, you could unintentionally twist it loose again. I may pull it apart later and throw some loctite in there just to keep it more secure, but this really is not an issue. it rotates maybe a milimeter or so, and the only issue is that it drags the other arm with it. There is absolutely no wobble with this incredibly minor amount of loosening. In all, this is a fantastic price for an incredibly stable and nice looking pair of arms with a wide range of movement and adjustment. I saw a few of the negative reviews for this and I'm not sure where they are getting the idea that this stand isn't that great for whatever reason because it really seems as close to perfect as it can get! I haven't attached it via the grommet method with the hole drilled through the table, just the regular clamping way and it feels great!

Overall an excellent product. Very sturdy, easy to adjust, stays in place, and easy to assemble. I read the reviews and understood that certain placement settings required some space beyond the front of the desk where the mount will go (not good for desks that are pushed up against a wall) I had nearly 5 inches between the front of the desk and the wall. It works for a lot of positions, but not all. I would recommend at least 6 inches, if not more, of space to ensure a full range of motion. Not a real issue for my needs, but just FYI. (FYI for the picture, I chose not to utilize the built-in cord management or decorative hardware caps as a personal choice. Not due to any issues.)

I have a couple monitors that i am using on my gaming rig and i need something to get both off the ground and clean up the look of the setup but also have really easy maneuverability with the mount especially because i like to game on one while doing work or other task on the other and would constantly adjust the monitors. This mount holds both monitors no problem even though i am sure one is either maxing the weight capacity or might above it this mount holds up. I was really surprised by the material it is made out of most of the parts are metal or really hard like ABS plastic. The mount is very sturdy without it being to hard to rotate or move the monitors around, out of the box the arms are very very tight but once you get a monitor on there it will feel better, i made the mistake of loosening the gas shock so it would have more flexibility in moving before i had mounted the monitor and almost cost me my monitor when it hit the desk because i loosened the shock to much. GREAT BUY anyone looking for a mount with the most versatile arms i have seen get this! Great buy and will definitely recommend to anyone looking for a mount!

I'm very happy with this monitor stand. Working at home all the time was killing my neck and eyes. The monitors previously sat on a shelf just above the desk, but were too far away and probably not the right height. I purchased this one because of the good reviews and it seemed to offer a lot of flexibility in terms of monitor arrangements. I was able to arrange the monitors one on top of the other, but I prefer them side by side. With fine tuning you can get them even with each other, but it's not that important to me. I like that I can easily raise or turn the monitors to access the computer docks underneath/behind. I haven't noticed any wobbling. I thought it was well packaged and easy to install. I installed it using the "VIVO black steel reinforcement mount plate" for fragile tabletops because my desktop is hollow wood with a slightly rounded edge and I wasn't sure how stable it would be. Works great! I highly recommend this monitor stand.

This monitor mount is a good choice if you are on a limited budget and need a dual mount with high positioning options. The quality is just ok, some of the parts feel cheap and the whole mount doesn't seem as sturdy as other mounts. If you can spend a bit more on a higher quality mount it would be worth doing, especially if you have expensive monitors. Pros: + Inexpensive + Tall mounting pole allows flexible height adjustments with minimal space needed behind the desk + Full range of motion + Tension adjustments + The aluminum arms feel reasonably strong Cons: - Overall fit and finish is cheap feeling - Plastic positioning clamps break easily. One of mine arrived broken. - Arms do not fit snugly around the pole until you secure the set screw, this is a manufacturing tolerance issue. - When only one monitor arm is attached, the main pole leans over under the weight. It needs the second arm attached to balance the weight. This shows that the base and pole are not very sturdy. - The clamp to secure under the desk could be larger to provide contact area. - The clamp adjustment knob/handle feels flimsy and thin compared to the knobs on my other monitor mounts. Seems like it would break under too much torque. Other thoughts: I'm giving this 3 stars only because of the reasonable price, currently $59 - at this price it does provide a decent value. I own several other monitor mounts and all of them are noticeably higher quality than this one, but they also cost more than this one. If you can afford it, get an AmazonBasics mount, they are made by Ergotron and are higher quality in every way. If you need a low budget mount, this one will do ok.

Not sure what's up with monitors these days with weak, flimsy stands. I bought 2 24" monitors that had stands that were the equivalent of balancing an orange on a toothpick. Even the slightest touch cause them to sway so much I thought i'd get seasick. On Prime day, I saw this arm was on sale and took a chance. I'm glad I did as so far it's been fantastic! It's intimidating when you open first open the box, as they included so many screws. So much so that I nearly closed to the box to return it think it would be complicated to assemble. I decided to take a look at the manual and quickly realized all the parts included were to cover any and every possible setup and monitor configuration. I chose the traditional clamp setup, but there have 3 different ways of mounting the base to your desk. It's also actually packed really well, each arm is separate so it was quick to assemble. Initially when you first snap the monitors into place they will sag downwards and the arms will slowly raise as if they are floating off into space, but all this is corrected by loosening the tension and adjusting the brackets with the included set of hex keys. This isn't to say you lock your monitors into 1 position forever. I'm able to adjust my monitors on the fly, raising and lowering without any issues. They align perfectly and most importantly do not shake or sway. I also appreciate the added cable management, as it gives it a clean, clutter free look, as well as little holders for the hex keys so they are readily available if you need to make any adjustments on the fly. The mess of wires in my photo at the base is because I refuse to purchase a dock for my laptop. I recommend this arm if you need a good mounting solution for multiple monitors on your desk.

Excellent quality, especially for the price. Some assembly required, but the main components are already preassembled. Have a 32” and a 27” - the base is much stronger than you may expect. The arms are very strong and of high quality. Rotate and spin work well. Beware that the tilt axis is relatively weak (you need to tighten a screw to fix the monitor in position); my 32” IPS has problems with tilting. Basically, the screen droops/tilts downward over time. Extreme torque required for heavier displays. Very good quality product. Well packaged with high quality components. Price is very good as well.

Very good product, gives a lot of flexibility for installation and how to setup your monitors. It's solid and even though I only had it for a couple weeks it looks durable and I already have bought another model from the same brand for my wife, which she has been using with no issues for about an year. The gas spring arms are really worth it! they make it very easy to move the screen up and down while keeping the monitor securely stable (you just need to adjust according to your screen weight, but it's really easy to do). I bought this primarily to gain desk space by eliminating monitor stands. Since I use the whole rig between two notebooks (work/personal), this allowed me enough space to have a single external keyboard and enough space to open either notebook under the main screen. Only reason I didn't give this product 5/5 stars across the board is because no matter how loose I leave the screws, when I rotate one of the arms around the vertical pole, the whole pole rotates and moves the other arm so I have to hold one of the arms in place while rotating the other. This is only bothering at the initial setup though (or if you need to be constantly rotating arms). Still, an awesome product, very useful and at a reasonable price!

I used this to mount my monitors vertically (one on top of another). Initially I had a 27 inch monitor at the bottom and a 24 inch at the top. This fit perfectly. Installation was laughably easy. You screw a few things, you tighten (or loosen) a few other things, and then you slap it all together. Ultimately I got a new monitor, and now have two 27 inchers stacked on top of each other. It barely fits. The bottom bezel of my top monitor is hidden behind the top bezel of my bottom monitor, but none of the actual screen is blocked. It's holding up pretty darn well given that it's holding two beefy boys. I must warn you though: depending on how heavy your monitors are, be prepared for some aesthetic damage to your table. My monitors are pretty heavy, and the mount left a permanent mark on my table. Sucks, but not the end of the world.

It was a little bigger than I expected and I had to pull my desk away from the wall for it to hold my 2 monitors side by side. It is very easy to assemble and each bag of parts is labelled so it was really easy to find which one to use. The screw that controls the tilt was SUPER tight and took me a while to loosen it. The cable management is pretty good and can hold maybe 2 or 3 cables if they are not super thick ones. Overall it's a good product, worth the price for me!