ANYCUBIC Standard UV Resin

I am currently using the High Clear resin with the Photon Mono 5s printer. The High Clear resin requires higher exposure times than the other AnyCubic resins I've used, otherwise it will be prone to avoid adhesion problems, supports stretching and warping the model, etc. I didn't realize this at first and mistakenly thought "High Clear" was short for "High Speed Clear" since they are both on the same product page, and so I promptly dialed in the wrong settings on my very first print with it - oops! Lesson learned: pay attention to the details and don't make assumptions based on the name. Still, I kind of wish they'd called it "Super Clear" or better yet given it a separate product listing to avoid that potential confusion. Anyway, High Clear may print slowly, but I feel the end result is worth it and so far I love this resin. The model in the picture is cured but unvarnished and was printed using the default 0.05mm layer height. I have also used it more recently at 0.03mm layer height at roughly 80% of the recommended exposure for 0.05mm and the results are great. High Clear performs much better than the clear eco resin I used previously, both better at avoiding yellowing on post-cure and seems like it may be more resilient (I haven't done any formal drop tests or other serious stress tests; this is just based on how flexible thin parts remain). I have used the High Clear resin in a minimally ventillated room with a VOC meter and it does indeed seem low VOC during printing and also when having small amounts of liquid resin and just-removed models sitting exposed to the air. Once a model is washed with alcohol (but before the final post-cure), the drying/evaporation process does cause a small spike on my VOC meter - but even leaving a very wet model drying in open air for a while doesn't read as high for VOCs as if I use even a small quantity of rubber glue in the same room.

I'm using this clear resin in a Heygears Reflex RS. I'm using the PAS10 black resin profile, and it's printing beautifully. Everything I expected and then some. If you want resin that's capable of printing truly glasslike clear prints, this one does the job.

GREAT MATERIAL !!!!

I've been using the ANYCUBIC 3D Printer Resin for several months now and I'm extremely satisfied with its performance. The resin produces high-quality prints with great detail and accuracy. It's also very easy to work with and provides consistent results.The 405nm wavelength is perfect for my SLA 3D printer and the UV-curing process is very efficient, allowing me to print faster and with less waste. The resin cures quickly and produces a solid, durable print.I appreciate that the ANYCUBIC 3D Printer Resin comes in a variety of colors and formulations to suit different needs. I've used the standard resin for everyday prints and the transparent resin for more artistic projects, and both have worked exceptionally well.Another thing I like about this resin is that it's very affordable compared to other brands. Despite its low price, it performs just as well or better than some of the more expensive resins I've used in the past.Overall, I highly recommend the ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin to anyone looking for a high-quality, affordable resin for their SLA 3D printer. It produces excellent results and is very easy to work with, making it a great choice for both beginners and experienced 3D printing enthusiasts.

I found it was good yield for the price, and I haven't used many resins, but this one separated from the black and white pigments that make it gray after sitting for a while. To mix it back up it's virtually impossible not to introduce air bubbles, which impacts print quality. Results were good, but not perfect on a Anycubic Photon 4, which disappointed me since I expected the match to be perfect out of the box.

The quality I expect from any cubic !

I've used the translucent green, grey, and clear. The grey is by far my favorite, and I've been able to get tolerances down to about 0.2-0.3 mm, which is way better than I expected for this printer and the cost of resin. It's not as good as ultra high end printers, but for the price, I haven't seen better.With the green, I was able to print DnD minis with good detail. I've used the grey for props and shop fixtures and hooks. They both retain great detail and are very strong. I'm able to hang tools off 3-mm thick hooks without breaking. I've used the clear for some parts, and it would be great for lenses or windows, but it does allow some UV light bleeding, so it doesn't work as well for complex geometry. Stick to simple parts for the clear, and use opaque resins like the grey for more detailed stuff.I've been able to print with this resin indoors without significant odor. I keep the printer in a shop area, so it's not in a confined space, but it hasn't needed a ton of ventilation.Instructions are a bit vague on exposure settings, so you'll want to do some research online and experiment with each new resin color before going right into making a big part. Look up some guides on how to calculate cure rates, calculate exposure times based on layer thickness (I usually do 0.050 mm for big parts, 0.025 mm for mini figures), and how to check your edge bleed with go-nogo gauges.For the cost, good detail, and low odor, I highly recommend.

Prints well in a SprintRay Pro 2 in my dental lab. Accurate enough for basic dental models for retainers and temporary partial dentures

J’utilise cette résine ELEGOO ABS Like 3.0 translucide depuis plusieurs impressions, et elle fait vraiment la différence. Elle offre un très bon équilibre entre rigidité et résistance, idéale pour les pièces mécaniques, les prototypes ou les éléments soumis à des contraintes.La viscosité est faible, ce qui permet une impression fluide et propre, avec un excellent niveau de détail. Le nettoyage à l’alcool isopropylique se fait facilement, et le durcissement UV donne une finition lisse et solide, sans déformation.Les points que j’apprécie particulièrement :Grande résistance aux chocs et à la torsion comparée aux résines standards.Finition translucide très propre, parfaite pour vérifier les couches internes.Aucune odeur forte ni problème d’adhérence sur le plateau.Excellent rapport qualité/prix pour la performance obtenue.Une résine fiable, résistante et précise, parfaite pour ceux qui recherchent la solidité du type ABS tout en conservant la finesse d’une impression 3D en résine. Je la recommande sans hésiter !

llego súper rápido, excelentes resultados con una exposición de 30s en las capas iniciales y 2.3 seg. en las demás capas utilizando una Creality Halot One

Buen precio y calidad

Très très bonne résine pour imprimante 3d étant débutant jai été surpris aucun défaut sur ma figurine 1/6 je recommande livraison rapide et sérieuse merci beaucoup

little expense but it is value for money