J-B Weld MinuteWeld

This stuff works great. Dries clear and is rock solid. The only thing is, you have about 45 seconds to get it on before it starts getting thick and un-spreadable. If you have a larger area I'd suggest doing a little at a time. Squeeze out a small amount, mix, apply, repeat. Also, you'll only get 2 uses out of the tube. Once you replace the cap it becomes fused to the syringe. You can pry it off with pliers the next time but you won't be getting the cap back on after that. All in all, a great product for the $$$. Works as advertised & holds up well under pressure. I used it toy repair the clear plastic drawer in the bottom of my fridge, and to repair the plastic housing of a mirror on my work vehicle. (GMC Sierra) Both repairs saved me $400 is replacement cost.

I used this two-part epoxy to repair broken pieces of my capodimonte porcelain chandelier. Two of the arms broke off when a tree fell on my house two years ago. This epoxy is absolutely fantastic. The quick drying time is amazing and within 10 minutes the adhesion was strong enough to hold and dry without additional clamps or bands. I was greatly impressed.

I love the JB Weld 5 min and 1 min epoxies because I have very small projects that I don't want to use clamps or tape for and wait 12 hours to set. The times on the package are accurate -- you get about 60 seconds to work with the "1 Minute" product, in other words, but it will need to fully dry over night. You won't need anything to hold it in place, though, because after 60 seconds, it's clear sludge and not 'workable.' I see a lot of the negative reviews are either A) "it didn't bond X to Y" or B) "it didn't withstand heavy use" or C) "it never set." If it didn't bond your items, it might be a function of the smoothness of what you're trying. Something porous like glass or metal to wood will work very well. Metal to plastic will also work very well. But two smooth surfaces like glass to glass will yield a less desirable result, like perhaps epoxying the glass handle that broke from a glass water pitcher. Whether your project survives heavy use is a function of how much epoxy you use. I wanted to glue my child's backpack strap to the pack (the stitches ripped). That's both heavy use and a bit of a risk that cloth to cloth won't hold. So I used an entire tube which worked well. People expecting to use two or three dabs to hold a car door on will be disappointed because surface area matters. As for people saying it never set, they probably somehow got defective tubes that both had glue and no hardener. Or they failed to mix the product (which, admittedly, you do not have a lot of time to do). I recommend trying the JB 5 minute if you need to position small things juuuuust right and the JB 1 minute if you can put your items into place without needing to spend time adjusting them.

I needed to reattach some flaking cement blush on my patio. Areas with surface cracking and I needed the glue to dry clear and be strong. I was advised this product would be the best. It really does work well, and has withstood the elements and the test of time. Use in well ventilated area, as this stink will last and last in the trash in your house etc. That being said, it worked well for my outdoor use, but does not work well for indoor use. You have to mix it, and for fine applications, just does not cut it. Set time is long, if you are working on a smaller project. The tips clog after second use, and then it gets to be a trial, but the glue in the tube is still liquid. Best for outdoor use. I would buy for that purpose again, as after a year, still holding the concrete together nicely.

I have a ceramic butter dish. The top had a handle that is tiny relative to the size and weight of the whole glass top. I used this glue, pressed it down and waited for 24 hours. It is now stuck back together really solid. I am so impressed. This stuff really works. I would caution that if you use it for the first time, be prepared for lots of stuff to come out very fast. I was surprised but luckily I had put the clump of stuff on a plastic plate so I could mix the two goops together apart from the surface that I wanted to glue. So I didn't make a mess on the butter dish top. Then I just took an appropriate amount and put it in place with a popsicle stick.

As expected

Cures clear. Although, not exactly as hard as I would like. I can still get a fingernail to leave an imprint if I try. I felt the 'no mess' cap was kind of cumbersome and gives no indication of position once taken off. So, you run the chance of mixing small amounts of epoxy and harder inadvertently just by rotating the cap 180 degrees. Not sure if this would harden enough to form a blockage, but the cap is better than others in that it actually is locked in place by the retaining clips vs a loose cap that you would find stuck upon gobs of half hardened resin.

Great product, although price is a little higher than our local stores. Product works as described with easy to follow instructions.

should work on false teeth

Bought this to repair a hairline crack in bathroom sink. Brilliant product. Easy to use but smells awful. Open a window!

THANKS

Concerned that most glues say, works on most plastics, but do not. This product worked well on hard plastics.

قوي التماسك