7112200 Tools 71 12 200, Comfort Grip High Leverage Cobolt Cutters with Opening Lock and Spring

Incredible quality! Chomps right through nails!

Bluntly put, up until last week I had not had much experience with bolt cutters and knew limited information about them as well. Knipex certainly is the the number one company to purchase mini bolt cutters that are 8 inches as well. Wow, these Knipex bolt cutters are terrific and are also 100% made in Germany as well. I've cut several types of screws with this and I even have cut a wide variety of metal with as well. Nothing too thick, but they did an exceptional job. I really like the fact that the cuts are even virtually every time. Provided though one uses these bolt cutters at an 90 degree angle precisely. Essentially you want to make the object your cutting as even as possible. Also what a difference a spring provides instead no spring attached. Not only has this provided a much easier time cutting multiple items repeatively, however this also provides better control in when cutting smaller items. Additionally, with a spring attachment there also in this case is a means of locking this tool when not in use and or for safety reasons as well. The handle is comfortable to use as well, even after extended usage as well. Should your grip be compromised, the handle ultillizes a non slip material as well. This is a fantastic mini bolt cutter and while this may cost more than your average mini bolt cutter, I am fairly certain this tool could easily last an exceptionally long time and Knipex has a life time warranty on most their tools as well. This tool is no exception to that warranty either. Overall, I do highly recommend this product and would and have already recommended this tool to anyone.

This product is more properly a heavy duty wire cutter rather than a bolt cutter. It cuts a ten penny common nail easily with 1 hand, and cuts a 16 penny nail with good pressure from two hands. (For comparison: I squeezed my bathroom scales and found that with both hands I can hold the scale at 150 lbs without bounce.) It cuts all types of insulated wire commonly used in houses easily and cleanly. I am unable to use it to cut cattle panel wire. The jaws open wide enough but it would not cut 1/4 inch round material unless it was exceptionally soft. This is a quality wire/nail cutter. It is a very handy size and comfortable to use. The lock mechanism is great. It serves well for most home/hobby wire cutting needs and will last most non-commercial users decades. If you need a wire cutter buy it. It is a good value.

These are an excellent tool. I’m using to cut 6 gauge copper grounding wire and a huge upgrade to the small bolt cutters I had been using

I have been looking at these Knipex bolt cutters for some time now but the price was always a bit high. I decided to purchase one and the first thing I noticed was the quality! The lock opens with just a slight flick of your thumb or index finger yet stays locked even while trying to shake it open. I have large hands and the comfort grip handles really gives you a solid feel. They are built like a tank with zero side movement and a great finish with no sharp edges. The cutting edges line up perfectly and boy do they cut! This is a tool that will last a lifetime with proper use and care. Now that I have them I would honestly say I would have payed much more for them. I highly recommend these bolt cutters to anyone that needs a tool like this.

Pricey, but such good quality that I have a pair for my toolbag and will be adding additional ones to my hiking packs. You can't cut a large bolt with these nor can you cut a padlock, but most smaller pieces of steel are handled well with these tools. I have some of the harbor freight cutters and can tell you that there is no comparison - you can't find anything at HF that compares to these. These operate smoothly, are quite comfortable to use and cut better than anything even remotely close to the same size. If I could change anything, it would be my income so that I could afford more Knipex tools - but since that will not happen any time soon, I'd wish for a lower price.

I bought the Knipex cutters to trim the bolts on about 50 cabinet knobs I was installing. I researched the various tools out there to make my life easier and found just the right one. For trimming cabinet bolts don't look any further, the nomenclature of the various models are confusing but these are what you want. Yes, they are over $50 but they are so far removed from the ubiquitous Chinese use once and throw away type of tool that $50 does not seem at all unreasonable, they are awesome. Honestly, these cutters would last a professional installer many years of daily use. For home use they should last pretty much forever. I have enough hand strength to cut cabinet hardware with 8" wire cutters or end cuts but it is not at all enjoyable, especially for the amount of knobs I needed to do. I am happy to report that the Knipex cutters will allow most anyone to cut thick wire and small bolts with ease. My wife gave it a try on some cabinet harware also and had no problem. This is the first Knipex product I have purchased but the quality of these cutters is so outstanding I will now seek out other Knipex tools when I need something special, or a tool to keep for the ages.

I enjoy making chain maille and use these to cut thousands of stainless steel rings out of 16ga wire. These are small enough to fit inside the rings to cut several at a time with ease! Very impressive and super nice quality. I originally bought the 6" version of these cutters but they could only really cut one ring (no, not THAT one ring) at a time, so these are much nicer for my application. Update about a year later: working on a second hauberk made of 14 ga galvanized steel wire and these still make easy work of it!

They cut through tough things with ease, which is why I bought them for myself after using them at work.

La Knipex Cobolt è una tronchese eccezionale, per adesso ho tagliato soltanto dei chiodi di 2,5 mm di diametro e delle viti di 4 mm di diametro e li ho potuti tagliare con una sola mano senza sforzo, è una tronchese maneggevole che pesa circa 350 grammi, la qualità costruttiva è eccellente come tutti i prodotti di questo marchio, perfetta per professionisti e hobbisti; in sintesi una tronchese affidabile e potente.

KNIPEX 71 12 200 CoBolt Compact Bolt Cutters I have very weak wrists and hands so cutting wire is hell for me. I get lightening pains up through my wrists and arms using my old normal wore cutters. These still take some pressure with the larger stiff, little more than I thought it would however they are amazing. No more pains up my arms. I can cut about 9 times the amount in one day than I used to with the normal wire cutters. Picture of the new and old cutters attached. I cut barbed wire and cattle fencing wires, also chicken wire (which is such a brease to cut with these). Well worth the money, I highly recommend them. Update: I have now been using these for 9 months, they all of a sudden became really really stiff, they were not springing back open on there own and I had to really pull them open and squash hard for them to close (the spring is perfectly fine). I tried pouring some chain saw oil over them which did not help at all. So I took them to a tool repair shop who sprayed them with a lubricant that had smaller particles (chain saw oil is too thick and heavy to penetrate into the tiny gaps). When your cutting a lot of wire it creates a miniscule metal dust (like a powder) that gets stuck in the moving parts and causes it to jam. They recommended that I use WD40 to spray on it each time I use it to clean out the hinges. It is now as good as new, working perfectly again. So keep them clean and lubricated :) If this review has been informative for you could you please give me a helpful vote below : ) Cheers

Impresionante desempeño. Muy recomendable

Kom smutsig, uppackad och med trasig kartong. Men funkade fint ändå.