Archery Target Stand

I stumbled on this while looking for targets one day. I looked at the price and figured it was worth a shot. Since I already had a bag target and was looking looking at getting some type of block this is perfect because it had a shelf to support it. Everything fit perfectly and what I really like is the small footprint. I can leave it assembled including the target, put it in the back of the garage, and still put my car in. The height of the shelf and top hanger are independently adjustable. Even the caribiners are adjustable to accommodate different widths of targets. The only complaint with this was the assembly. If you're not mechanically inclined and/or you have to have every single step laid out in front of you, it's gonna be a bit frustrating. They use the picture method for instructions, meaning they just show stuff put together, but not really how they did it. They also use the bag-o-screws method of throwing all of your hardware together in one bag. Then it's up to you to figure out what screws they want you to use among identical looking but different sized hardware. Once you figure out one side of the frame the other is simple. Thankfully since there aren't a lot of parts, the assembly got easier through process of elimination. They do give you wrenches for the hardware which I thought was really nice, but I used my own sockets (millimeter) just to make it faster. It took me a little over an hour to assemble only because I had to figure out the instructions. This could easily be cut in half with better instructions and labeling. Assembly issue aside, I couldn't be happier with it.

I received this yesterday 08-13-2024, now 1st. Of all the box it came in was 36" tall or so not exact as I did measure an the thickness or with approximately 2-3", now to move on the frame is somewhat grey in color has a really nice finish instructions to me like everyone is saying not much help to me I'm very mechanically inclined so for me just to look at the front page of instructions (picture) an the parts list was very helpful I then laid out all the frame rails an the pkg. Hardware was nicely separated in to 3- plastic Ziploc bags separated all parts then put together using my own metric socket 10mm an wrench same 10mm went together nicely an when finished it is really sturdy no wobble, an the 2 adjustable rails with the threaded knobs worked great, can't understand why some had issues but I would guess possibly defective, or over tightened but for me no issues really nice easily adjusted the 2 rails where needed slides easily carbineer s also nice size 3" in length approximately, an there is a hole in each leg corner for a gutter nail, I used a railroad nail 1/8" in diameter an 10" long if needed but with a 20 lb. Target on there resting on the horizontal rails should keep it well balanced, so to me it wa a fantastic purchase for the cost an strength of the steel used now me I've had absolutely no issues, an hopefully for you the same I would most definitely recommend this archery stand for anyone looking for one, have fun shoot more miss less, enjoy the hobby at 69 yrs. Perfect for me, happy to leave everyone this review hope it was helpful

Very easy to put together. Solidly built. Would recommend for any backyard archery setup.

The archery stand arrived in good time. All the parts necessary were included, including two cheap wrenches which did the job. Instruction do not have a lot of text and it's mainly illustrations. Just line up the bolts and know that each bolt has a flat washer and split/ locking washer and make sure you use them all. I do a lot of DIY, and assembling this was fairly straight forward. If I had bothered to use my power tools, I would have been done sooner. Generally took me a little over 1/2hour to assemble. Except once I tried to tighten up one of the plastic handled bolts, the nut that was welded to the frame detached. Revealing that each nut has two spot welds. The stand comes with a factory applied finish which doesn't seem very robust and the legs/feet have no rubber or plastic feet, just sharp metal edge. I do not recommend using this inside on wood floors. The metal appears to be a mild steel and when tightening some of the bolts against the rectangular tube sections, the bolt head will indent the metal. Maybe additional washers for the bolt head would have helped dissipate the force. I contacted the seller and they were very responsive in shipping a replacement part after sharing of photos to help them determine the right part. Service was responsive and prompt which gets them the 4 stars the product itself is not as durable as it should be but the price is affordable, so we are likely getting what we paid for. I have painted the frame with plasticdip because this will remain outside all year long.

I just got this delivered yesterday and have to say...WOW!!! The contents were all excellently packaged, both in an outer box and then in the smaller product box, that had everything neatly arranged. (Some have stated bad experiences w/ damaged and/or bent parts, but mine was pristine). Total assembly time for me was about 1/2 hour by myself. I started by scanning the instructions and then laying out the parts & hardware to make sure everything was included. Even a couple handy wrenches for tightening the nuts & bolts were there. So I started the assembly. I did run into trouble in step #2 in that a bracket didn't seem to be lining up with the holes. I did panic and undid nuts/bolts from step #1 to reassess the situation and restarted. Whatever I had done wrong was corrected and assembly then moved forward w/out a single glitch after that. I REALLY like the sturdiness and the ability of it being able to adapt to various targets. I placed a large Morrell 28" x 31" range target on it and it holds it great. I can not wait until Spring so I can set this up in my back yard and get some range time in!! An EXCELLENT stand! After I have it all set outside I will update this with photos. All in all I am very glad to get this and would definitely recommend it to anyone who wants a quality target stand.

Awesome sturdy exactly what it says it is. Putting together seems slightly repetitive but it is what it is. Great job good product.

The stand has a very solid wheat to it. It did not get knocked over in 50 mile an hour winds. It works well with a backstop made of Haybale’s. It’s an excellent value for the money. We have acreage so we set up a home, archery range, and everyone from children to seniors have used it. The weight of the materials makes me feel like this is a quality product that will last a long time. The assembly instructions were terrible, but once I figured it out how to assemble it the assembly was fast, but I do recommend using two people. My in-laws plan to buy one also.

I didn't have any problems with this Archery stand! This product came as advertised! It took me about 35 minutes to assemble. If for some reason that I needed another one, I would purchase this stand again!

Good stand. It can hold the target well.

Poor quality control. Welds were crooked on the crossbar which means if I use the crossbar, it twists the rest of the frame. Crossbar welds were off by about 10 degrees. Enough that the bar has to be hammered into place and then doing so wrenches the frame so it won't sit flat.

Sur le plant, il y a des chiffres et lettres pour l'assemblage mais pas sur les morceaux ! Après l'assemblage finale, le résultat est décevant. Ce n'est pas parfaitement droit.